init

Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c

@@ -0,0 +1,765 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_hal.c
+  * @author  MCD Application Team
+  * @brief   HAL module driver.
+  *          This is the common part of the HAL initialization
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The common HAL driver contains a set of generic and common APIs that can be
+    used by the PPP peripheral drivers and the user to start using the HAL.
+    [..]
+    The HAL contains two APIs' categories:
+         (+) Common HAL APIs
+         (+) Services HAL APIs
+
+  @endverbatim
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HAL HAL
+  * @brief HAL module driver
+  * @{
+  */
+
+#ifdef HAL_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/**
+ * @brief STM32L4xx HAL Driver version number
+   */
+#define STM32L4XX_HAL_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
+#define STM32L4XX_HAL_VERSION_SUB1   (0x0DU) /*!< [23:16] sub1 version */
+#define STM32L4XX_HAL_VERSION_SUB2   (0x05U) /*!< [15:8]  sub2 version */
+#define STM32L4XX_HAL_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
+#define STM32L4XX_HAL_VERSION        ((STM32L4XX_HAL_VERSION_MAIN  << 24U)\
+                                      |(STM32L4XX_HAL_VERSION_SUB1 << 16U)\
+                                      |(STM32L4XX_HAL_VERSION_SUB2 << 8U)\
+                                      |(STM32L4XX_HAL_VERSION_RC))
+
+#if defined(VREFBUF)
+#define VREFBUF_TIMEOUT_VALUE     10U   /* 10 ms (to be confirmed) */
+#endif /* VREFBUF */
+
+/* ------------ SYSCFG registers bit address in the alias region ------------ */
+#define SYSCFG_OFFSET             (SYSCFG_BASE - PERIPH_BASE)
+/* ---  MEMRMP Register ---*/
+/* Alias word address of FB_MODE bit */
+#define MEMRMP_OFFSET             SYSCFG_OFFSET
+#define FB_MODE_BitNumber         8U
+#define FB_MODE_BB                (PERIPH_BB_BASE + (MEMRMP_OFFSET * 32U) + (FB_MODE_BitNumber * 4U))
+
+/* --- SCSR Register ---*/
+/* Alias word address of SRAM2ER bit */
+#define SCSR_OFFSET               (SYSCFG_OFFSET + 0x18U)
+#define BRER_BitNumber            0U
+#define SCSR_SRAM2ER_BB           (PERIPH_BB_BASE + (SCSR_OFFSET * 32U) + (BRER_BitNumber * 4U))
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported variables --------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Variables HAL Exported Variables
+  * @{
+  */
+__IO uint32_t uwTick;
+uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid priority */
+HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT;  /* 1KHz */
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+  * @{
+  */
+
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ *  @brief    Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the Flash interface, the NVIC allocation and initial time base
+          clock configuration.
+      (+) De-initialize common part of the HAL.
+      (+) Configure the time base source to have 1ms time base with a dedicated
+          Tick interrupt priority.
+        (++) SysTick timer is used by default as source of time base, but user
+             can eventually implement his proper time base source (a general purpose
+             timer for example or other time source), keeping in mind that Time base
+             duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
+             handled in milliseconds basis.
+        (++) Time base configuration function (HAL_InitTick ()) is called automatically
+             at the beginning of the program after reset by HAL_Init() or at any time
+             when clock is configured, by HAL_RCC_ClockConfig().
+        (++) Source of time base is configured  to generate interrupts at regular
+             time intervals. Care must be taken if HAL_Delay() is called from a
+             peripheral ISR process, the Tick interrupt line must have higher priority
+            (numerically lower) than the peripheral interrupt. Otherwise the caller
+            ISR process will be blocked.
+       (++) functions affecting time base configurations are declared as __weak
+             to make  override possible  in case of other  implementations in user file.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configure the Flash prefetch, the Instruction and Data caches,
+  *         the time base source, NVIC and any required global low level hardware
+  *         by calling the HAL_MspInit() callback function to be optionally defined in user file
+  *         stm32l4xx_hal_msp.c.
+  *
+  * @note   HAL_Init() function is called at the beginning of program after reset and before
+  *         the clock configuration.
+  *
+  * @note   In the default implementation the System Timer (Systick) is used as source of time base.
+  *         The Systick configuration is based on MSI clock, as MSI is the clock
+  *         used after a system Reset and the NVIC configuration is set to Priority group 4.
+  *         Once done, time base tick starts incrementing: the tick variable counter is incremented
+  *         each 1ms in the SysTick_Handler() interrupt handler.
+  *
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_Init(void)
+{
+  HAL_StatusTypeDef  status = HAL_OK;
+
+  /* Configure Flash prefetch, Instruction cache, Data cache */
+  /* Default configuration at reset is:                      */
+  /* - Prefetch disabled                                     */
+  /* - Instruction cache enabled                             */
+  /* - Data cache enabled                                    */
+#if (INSTRUCTION_CACHE_ENABLE == 0)
+   __HAL_FLASH_INSTRUCTION_CACHE_DISABLE();
+#endif /* INSTRUCTION_CACHE_ENABLE */
+
+#if (DATA_CACHE_ENABLE == 0)
+   __HAL_FLASH_DATA_CACHE_DISABLE();
+#endif /* DATA_CACHE_ENABLE */
+
+#if (PREFETCH_ENABLE != 0)
+  __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif /* PREFETCH_ENABLE */
+
+  /* Set Interrupt Group Priority */
+  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+  /* Use SysTick as time base source and configure 1ms tick (default clock after Reset is MSI) */
+  if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK)
+  {
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Init the low level hardware */
+    HAL_MspInit();
+  }
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief De-initialize common part of the HAL and stop the source of time base.
+  * @note This function is optional.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+  /* Reset of all peripherals */
+  __HAL_RCC_APB1_FORCE_RESET();
+  __HAL_RCC_APB1_RELEASE_RESET();
+
+  __HAL_RCC_APB2_FORCE_RESET();
+  __HAL_RCC_APB2_RELEASE_RESET();
+
+  __HAL_RCC_AHB1_FORCE_RESET();
+  __HAL_RCC_AHB1_RELEASE_RESET();
+
+  __HAL_RCC_AHB2_FORCE_RESET();
+  __HAL_RCC_AHB2_RELEASE_RESET();
+
+  __HAL_RCC_AHB3_FORCE_RESET();
+  __HAL_RCC_AHB3_RELEASE_RESET();
+
+  /* De-Init the low level hardware */
+  HAL_MspDeInit();
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the MSP.
+  * @retval None
+  */
+__weak void HAL_MspInit(void)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitialize the MSP.
+  * @retval None
+  */
+__weak void HAL_MspDeInit(void)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief This function configures the source of the time base:
+  *        The time source is configured to have 1ms time base with a dedicated
+  *        Tick interrupt priority.
+  * @note This function is called  automatically at the beginning of program after
+  *       reset by HAL_Init() or at any time when clock is reconfigured  by HAL_RCC_ClockConfig().
+  * @note In the default implementation, SysTick timer is the source of time base.
+  *       It is used to generate interrupts at regular time intervals.
+  *       Care must be taken if HAL_Delay() is called from a peripheral ISR process,
+  *       The SysTick interrupt must have higher priority (numerically lower)
+  *       than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+  *       The function is declared as __weak  to be overwritten  in case of other
+  *       implementation  in user file.
+  * @param TickPriority  Tick interrupt priority.
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+  HAL_StatusTypeDef  status = HAL_OK;
+
+  /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that doesn't take the value zero)*/
+  if ((uint32_t)uwTickFreq != 0U)
+  {
+    /*Configure the SysTick to have interrupt in 1ms time basis*/
+    if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / (uint32_t)uwTickFreq)) == 0U)
+    {
+      /* Configure the SysTick IRQ priority */
+      if (TickPriority < (1UL << __NVIC_PRIO_BITS))
+      {
+        HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);
+        uwTickPrio = TickPriority;
+      }
+      else
+      {
+        status = HAL_ERROR;
+      }
+    }
+    else
+    {
+      status = HAL_ERROR;
+    }
+  }
+  else
+  {
+    status = HAL_ERROR;
+  }
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
+ *  @brief    HAL Control functions
+ *
+@verbatim
+ ===============================================================================
+                      ##### HAL Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Provide a tick value in millisecond
+      (+) Provide a blocking delay in millisecond
+      (+) Suspend the time base source interrupt
+      (+) Resume the time base source interrupt
+      (+) Get the HAL API driver version
+      (+) Get the device identifier
+      (+) Get the device revision identifier
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief This function is called to increment a global variable "uwTick"
+  *        used as application time base.
+  * @note In the default implementation, this variable is incremented each 1ms
+  *       in SysTick ISR.
+ * @note This function is declared as __weak to be overwritten in case of other
+  *      implementations in user file.
+  * @retval None
+  */
+__weak void HAL_IncTick(void)
+{
+  uwTick += (uint32_t)uwTickFreq;
+}
+
+/**
+  * @brief Provide a tick value in millisecond.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval tick value
+  */
+__weak uint32_t HAL_GetTick(void)
+{
+  return uwTick;
+}
+
+/**
+  * @brief This function returns a tick priority.
+  * @retval tick priority
+  */
+uint32_t HAL_GetTickPrio(void)
+{
+  return uwTickPrio;
+}
+
+/**
+  * @brief Set new tick Freq.
+  * @param Freq tick frequency
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)
+{
+  HAL_StatusTypeDef status  = HAL_OK;
+  HAL_TickFreqTypeDef prevTickFreq;
+
+  if (uwTickFreq != Freq)
+  {
+    /* Back up uwTickFreq frequency */
+    prevTickFreq = uwTickFreq;
+
+    /* Update uwTickFreq global variable used by HAL_InitTick() */
+    uwTickFreq = Freq;
+
+    /* Apply the new tick Freq  */
+    status = HAL_InitTick(uwTickPrio);
+    if (status != HAL_OK)
+    {
+      /* Restore previous tick frequency */
+      uwTickFreq = prevTickFreq;
+    }
+  }
+
+  return status;
+}
+
+/**
+  * @brief Return tick frequency.
+  * @retval Tick frequency.
+  *         Value of @ref HAL_TickFreqTypeDef.
+  */
+HAL_TickFreqTypeDef HAL_GetTickFreq(void)
+{
+  return uwTickFreq;
+}
+
+/**
+  * @brief This function provides minimum delay (in milliseconds) based
+  *        on variable incremented.
+  * @note In the default implementation , SysTick timer is the source of time base.
+  *       It is used to generate interrupts at regular time intervals where uwTick
+  *       is incremented.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @param Delay  specifies the delay time length, in milliseconds.
+  * @retval None
+  */
+__weak void HAL_Delay(uint32_t Delay)
+{
+  uint32_t tickstart = HAL_GetTick();
+  uint32_t wait = Delay;
+
+  /* Add a period to guaranty minimum wait */
+  if (wait < HAL_MAX_DELAY)
+  {
+    wait += (uint32_t)uwTickFreq;
+  }
+
+  while ((HAL_GetTick() - tickstart) < wait)
+  {
+  }
+}
+
+/**
+  * @brief Suspend Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+  *       is called, the SysTick interrupt will be disabled and so Tick increment
+  *       is suspended.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_SuspendTick(void)
+{
+  /* Disable SysTick Interrupt */
+  SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+  * @brief Resume Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+  *       is called, the SysTick interrupt will be enabled and so Tick increment
+  *       is resumed.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_ResumeTick(void)
+{
+  /* Enable SysTick Interrupt */
+  SysTick->CTRL  |= SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+  * @brief  Return the HAL revision.
+  * @retval version : 0xXYZR (8bits for each decimal, R for RC)
+  */
+uint32_t HAL_GetHalVersion(void)
+{
+  return STM32L4XX_HAL_VERSION;
+}
+
+/**
+  * @brief  Return the device revision identifier.
+  * @retval Device revision identifier
+  */
+uint32_t HAL_GetREVID(void)
+{
+  return((DBGMCU->IDCODE & DBGMCU_IDCODE_REV_ID) >> 16);
+}
+
+/**
+  * @brief  Return the device identifier.
+  * @retval Device identifier
+  */
+uint32_t HAL_GetDEVID(void)
+{
+  return(DBGMCU->IDCODE & DBGMCU_IDCODE_DEV_ID);
+}
+
+/**
+  * @brief  Return the first word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw0(void)
+{
+  return(READ_REG(*((uint32_t *)UID_BASE)));
+}
+
+/**
+  * @brief  Return the second word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw1(void)
+{
+  return(READ_REG(*((uint32_t *)(UID_BASE + 4U))));
+}
+
+/**
+  * @brief  Return the third word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw2(void)
+{
+  return(READ_REG(*((uint32_t *)(UID_BASE + 8U))));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Exported_Functions_Group3 HAL Debug functions
+ *  @brief    HAL Debug functions
+ *
+@verbatim
+ ===============================================================================
+                      ##### HAL Debug functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Enable/Disable Debug module during SLEEP mode
+      (+) Enable/Disable Debug module during STOP0/STOP1/STOP2 modes
+      (+) Enable/Disable Debug module during STANDBY mode
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enable the Debug Module during SLEEP mode.
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGSleepMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Disable the Debug Module during SLEEP mode.
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGSleepMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Enable the Debug Module during STOP0/STOP1/STOP2 modes.
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStopMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Disable the Debug Module during STOP0/STOP1/STOP2 modes.
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStopMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Enable the Debug Module during STANDBY mode.
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStandbyMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @brief  Disable the Debug Module during STANDBY mode.
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStandbyMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Exported_Functions_Group4 HAL SYSCFG configuration functions
+ *  @brief    HAL SYSCFG configuration functions
+ *
+@verbatim
+ ===============================================================================
+                      ##### HAL SYSCFG configuration functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Start a hardware SRAM2 erase operation
+      (+) Enable/Disable the Internal FLASH Bank Swapping
+      (+) Configure the Voltage reference buffer
+      (+) Enable/Disable the Voltage reference buffer
+      (+) Enable/Disable the I/O analog switch voltage booster
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Start a hardware SRAM2 erase operation.
+  * @note   As long as SRAM2 is not erased the SRAM2ER bit will be set.
+  *         This bit is automatically reset at the end of the SRAM2 erase operation.
+  * @retval None
+  */
+void HAL_SYSCFG_SRAM2Erase(void)
+{
+  /* unlock the write protection of the SRAM2ER bit */
+  SYSCFG->SKR = 0xCA;
+  SYSCFG->SKR = 0x53;
+  /* Starts a hardware SRAM2 erase operation*/
+  *(__IO uint32_t *) SCSR_SRAM2ER_BB = 0x00000001UL;
+}
+
+/**
+  * @brief  Enable the Internal FLASH Bank Swapping.
+  *
+  * @note   This function can be used only for STM32L4xx devices.
+  *
+  * @note   Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000)
+  *         and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000)
+  *
+  * @retval None
+  */
+void HAL_SYSCFG_EnableMemorySwappingBank(void)
+{
+  *(__IO uint32_t *)FB_MODE_BB = 0x00000001UL;
+}
+
+/**
+  * @brief  Disable the Internal FLASH Bank Swapping.
+  *
+  * @note   This function can be used only for STM32L4xx devices.
+  *
+  * @note   The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x0000 0000)
+  *         and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000)
+  *
+  * @retval None
+  */
+void HAL_SYSCFG_DisableMemorySwappingBank(void)
+{
+
+  *(__IO uint32_t *)FB_MODE_BB = 0x00000000UL;
+}
+
+#if defined(VREFBUF)
+/**
+  * @brief Configure the internal voltage reference buffer voltage scale.
+  * @param VoltageScaling  specifies the output voltage to achieve
+  *          This parameter can be one of the following values:
+  *            @arg SYSCFG_VREFBUF_VOLTAGE_SCALE0: VREF_OUT1 around 2.048 V.
+  *                                                This requires VDDA equal to or higher than 2.4 V.
+  *            @arg SYSCFG_VREFBUF_VOLTAGE_SCALE1: VREF_OUT2 around 2.5 V.
+  *                                                This requires VDDA equal to or higher than 2.8 V.
+  * @retval None
+  */
+void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling));
+
+  MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling);
+}
+
+/**
+  * @brief Configure the internal voltage reference buffer high impedance mode.
+  * @param Mode  specifies the high impedance mode
+  *          This parameter can be one of the following values:
+  *            @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE: VREF+ pin is internally connect to VREFINT output.
+  *            @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE: VREF+ pin is high impedance.
+  * @retval None
+  */
+void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(Mode));
+
+  MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode);
+}
+
+/**
+  * @brief  Tune the Internal Voltage Reference buffer (VREFBUF).
+  * @retval None
+  */
+void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue));
+
+  MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue);
+}
+
+/**
+  * @brief  Enable the Internal Voltage Reference buffer (VREFBUF).
+  * @retval HAL_OK/HAL_TIMEOUT
+  */
+HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void)
+{
+  uint32_t  tickstart;
+
+  SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR);
+
+  /* Get Start Tick*/
+  tickstart = HAL_GetTick();
+
+  /* Wait for VRR bit  */
+  while(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == 0U)
+  {
+    if((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable the Internal Voltage Reference buffer (VREFBUF).
+  *
+  * @retval None
+  */
+void HAL_SYSCFG_DisableVREFBUF(void)
+{
+  CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR);
+}
+#endif /* VREFBUF */
+
+/**
+  * @brief  Enable the I/O analog switch voltage booster
+  *
+  * @retval None
+  */
+void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void)
+{
+  SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN);
+}
+
+/**
+  * @brief  Disable the I/O analog switch voltage booster
+  *
+  * @retval None
+  */
+void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void)
+{
+  CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c

@@ -0,0 +1,541 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_hal_cortex.c
+  * @author  MCD Application Team
+  * @brief   CORTEX HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the CORTEX:
+  *           + Initialization and Configuration functions
+  *           + Peripheral Control functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+
+    [..]
+    *** How to configure Interrupts using CORTEX HAL driver ***
+    ===========================================================
+    [..]
+    This section provides functions allowing to configure the NVIC interrupts (IRQ).
+    The Cortex-M4 exceptions are managed by CMSIS functions.
+
+    (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() function.
+    (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority().
+    (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ().
+
+     -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ pre-emption is no more possible.
+         The pending IRQ priority will be managed only by the sub priority.
+
+     -@- IRQ priority order (sorted by highest to lowest priority):
+        (+@) Lowest pre-emption priority
+        (+@) Lowest sub priority
+        (+@) Lowest hardware priority (IRQ number)
+
+    [..]
+    *** How to configure SysTick using CORTEX HAL driver ***
+    ========================================================
+    [..]
+    Setup SysTick Timer for time base.
+
+   (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which
+       is a CMSIS function that:
+        (++) Configures the SysTick Reload register with value passed as function parameter.
+        (++) Configures the SysTick IRQ priority to the lowest value (0x0F).
+        (++) Resets the SysTick Counter register.
+        (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
+        (++) Enables the SysTick Interrupt.
+        (++) Starts the SysTick Counter.
+
+   (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
+       __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
+       HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
+       inside the stm32l4xx_hal_cortex.h file.
+
+   (+) You can change the SysTick IRQ priority by calling the
+       HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
+       call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
+
+   (+) To adjust the SysTick time base, use the following formula:
+
+       Reload Value = SysTick Counter Clock (Hz) x  Desired Time base (s)
+       (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
+       (++) Reload Value should not exceed 0xFFFFFF
+
+  @endverbatim
+  ******************************************************************************
+
+  The table below gives the allowed values of the pre-emption priority and subpriority according
+  to the Priority Grouping configuration performed by HAL_NVIC_SetPriorityGrouping() function.
+  
+    ==========================================================================================================================
+      NVIC_PriorityGroup   | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority  |       Description
+    ==========================================================================================================================
+     NVIC_PRIORITYGROUP_0  |                0                  |            0-15             | 0 bit for pre-emption priority
+                           |                                   |                             | 4 bits for subpriority
+    --------------------------------------------------------------------------------------------------------------------------
+     NVIC_PRIORITYGROUP_1  |                0-1                |            0-7              | 1 bit for pre-emption priority
+                           |                                   |                             | 3 bits for subpriority
+    --------------------------------------------------------------------------------------------------------------------------    
+     NVIC_PRIORITYGROUP_2  |                0-3                |            0-3              | 2 bits for pre-emption priority
+                           |                                   |                             | 2 bits for subpriority
+    --------------------------------------------------------------------------------------------------------------------------    
+     NVIC_PRIORITYGROUP_3  |                0-7                |            0-1              | 3 bits for pre-emption priority
+                           |                                   |                             | 1 bit for subpriority
+    --------------------------------------------------------------------------------------------------------------------------    
+     NVIC_PRIORITYGROUP_4  |                0-15               |            0                | 4 bits for pre-emption priority
+                           |                                   |                             | 0 bit for subpriority                       
+    ==========================================================================================================================
+
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CORTEX
+  * @{
+  */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup CORTEX_Exported_Functions
+  * @{
+  */
+
+
+/** @addtogroup CORTEX_Exported_Functions_Group1
+ *  @brief    Initialization and Configuration functions
+ *
+@verbatim
+  ==============================================================================
+              ##### Initialization and Configuration functions #####
+  ==============================================================================
+    [..]
+      This section provides the CORTEX HAL driver functions allowing to configure Interrupts
+      SysTick functionalities
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Set the priority grouping field (pre-emption priority and subpriority)
+  *         using the required unlock sequence.
+  * @param  PriorityGroup: The priority grouping bits length.
+  *         This parameter can be one of the following values:
+  *         @arg NVIC_PRIORITYGROUP_0: 0 bit  for pre-emption priority,
+  *                                    4 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_1: 1 bit  for pre-emption priority,
+  *                                    3 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority,
+  *                                    2 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority,
+  *                                    1 bit  for subpriority
+  *         @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority,
+  *                                    0 bit  for subpriority
+  * @note   When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
+  *         The pending IRQ priority will be managed only by the subpriority.
+  * @retval None
+  */
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+
+  /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
+  NVIC_SetPriorityGrouping(PriorityGroup);
+}
+
+/**
+  * @brief  Set the priority of an interrupt.
+  * @param  IRQn: External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h))
+  * @param  PreemptPriority: The pre-emption priority for the IRQn channel.
+  *         This parameter can be a value between 0 and 15
+  *         A lower priority value indicates a higher priority
+  * @param  SubPriority: the subpriority level for the IRQ channel.
+  *         This parameter can be a value between 0 and 15
+  *         A lower priority value indicates a higher priority.
+  * @retval None
+  */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t prioritygroup = 0x00;
+
+  /* Check the parameters */
+  assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
+  assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+
+  prioritygroup = NVIC_GetPriorityGrouping();
+
+  NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
+}
+
+/**
+  * @brief  Enable a device specific interrupt in the NVIC interrupt controller.
+  * @note   To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+  *         function should be called before.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Enable interrupt */
+  NVIC_EnableIRQ(IRQn);
+}
+
+/**
+  * @brief  Disable a device specific interrupt in the NVIC interrupt controller.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Disable interrupt */
+  NVIC_DisableIRQ(IRQn);
+}
+
+/**
+  * @brief  Initiate a system reset request to reset the MCU.
+  * @retval None
+  */
+void HAL_NVIC_SystemReset(void)
+{
+  /* System Reset */
+  NVIC_SystemReset();
+}
+
+/**
+  * @brief  Initialize the System Timer with interrupt enabled and start the System Tick Timer (SysTick): 
+  *         Counter is in free running mode to generate periodic interrupts.
+  * @param  TicksNumb: Specifies the ticks Number of ticks between two interrupts.
+  * @retval status:  - 0  Function succeeded.
+  *                  - 1  Function failed.
+  */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+   return SysTick_Config(TicksNumb);
+}
+/**
+  * @}
+  */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+ *  @brief   Cortex control functions
+ *
+@verbatim
+  ==============================================================================
+                      ##### Peripheral Control functions #####
+  ==============================================================================
+    [..]
+      This subsection provides a set of functions allowing to control the CORTEX
+      (NVIC, SYSTICK, MPU) functionalities.
+
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Get the priority grouping field from the NVIC Interrupt Controller.
+  * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
+  */
+uint32_t HAL_NVIC_GetPriorityGrouping(void)
+{
+  /* Get the PRIGROUP[10:8] field value */
+  return NVIC_GetPriorityGrouping();
+}
+
+/**
+  * @brief  Get the priority of an interrupt.
+  * @param  IRQn: External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h))
+  * @param   PriorityGroup: the priority grouping bits length.
+  *         This parameter can be one of the following values:
+  *           @arg NVIC_PRIORITYGROUP_0: 0 bit for pre-emption priority,
+  *                                      4 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_1: 1 bit for pre-emption priority,
+  *                                      3 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority,
+  *                                      2 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority,
+  *                                      1 bit for subpriority
+  *           @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority,
+  *                                      0 bit for subpriority
+  * @param  pPreemptPriority: Pointer on the Preemptive priority value (starting from 0).
+  * @param  pSubPriority: Pointer on the Subpriority value (starting from 0).
+  * @retval None
+  */
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+ /* Get priority for Cortex-M system or device specific interrupts */
+  NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
+}
+
+/**
+  * @brief  Set Pending bit of an external interrupt.
+  * @param  IRQn External interrupt number
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Set interrupt pending */
+  NVIC_SetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Get Pending Interrupt (read the pending register in the NVIC
+  *         and return the pending bit for the specified interrupt).
+  * @param  IRQn External interrupt number.
+  *          This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h))
+  * @retval status: - 0  Interrupt status is not pending.
+  *                 - 1  Interrupt status is pending.
+  */
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Return 1 if pending else 0 */
+  return NVIC_GetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Clear the pending bit of an external interrupt.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Clear pending interrupt */
+  NVIC_ClearPendingIRQ(IRQn);
+}
+
+/**
+  * @brief Get active interrupt (read the active register in NVIC and return the active bit).
+  * @param IRQn External interrupt number
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h))
+  * @retval status: - 0  Interrupt status is not pending.
+  *                 - 1  Interrupt status is pending.
+  */
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
+{
+  /* Return 1 if active else 0 */
+  return NVIC_GetActive(IRQn);
+}
+
+/**
+  * @brief  Configure the SysTick clock source.
+  * @param  CLKSource: specifies the SysTick clock source.
+  *          This parameter can be one of the following values:
+  *             @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+  *             @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+  * @retval None
+  */
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
+  if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
+  {
+    SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
+  }
+  else
+  {
+    SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
+  }
+}
+
+/**
+  * @brief  Handle SYSTICK interrupt request.
+  * @retval None
+  */
+void HAL_SYSTICK_IRQHandler(void)
+{
+  HAL_SYSTICK_Callback();
+}
+
+/**
+  * @brief  SYSTICK callback.
+  * @retval None
+  */
+__weak void HAL_SYSTICK_Callback(void)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SYSTICK_Callback could be implemented in the user file
+   */
+}
+
+#if (__MPU_PRESENT == 1)
+/**
+  * @brief  Enable the MPU.
+  * @param  MPU_Control: Specifies the control mode of the MPU during hard fault, 
+  *          NMI, FAULTMASK and privileged accessto the default memory 
+  *          This parameter can be one of the following values:
+  *            @arg MPU_HFNMI_PRIVDEF_NONE
+  *            @arg MPU_HARDFAULT_NMI
+  *            @arg MPU_PRIVILEGED_DEFAULT
+  *            @arg MPU_HFNMI_PRIVDEF
+  * @retval None
+  */
+void HAL_MPU_Enable(uint32_t MPU_Control)
+{
+  /* Enable the MPU */
+  MPU->CTRL = (MPU_Control | MPU_CTRL_ENABLE_Msk);
+
+  /* Ensure MPU setting take effects */
+  __DSB();
+  __ISB();
+}
+
+
+/**
+  * @brief  Disable the MPU.
+  * @retval None
+  */
+void HAL_MPU_Disable(void)
+{
+  /* Make sure outstanding transfers are done */
+  __DMB();
+
+  /* Disable the MPU and clear the control register*/
+  MPU->CTRL  = 0;
+}
+
+/**
+  * @brief  Enable the MPU Region.
+  * @retval None
+  */
+void HAL_MPU_EnableRegion(uint32_t RegionNumber)
+{
+  /* Check the parameters */
+  assert_param(IS_MPU_REGION_NUMBER(RegionNumber));
+
+  /* Set the Region number */
+  MPU->RNR = RegionNumber;
+
+  /* Enable the Region */
+  SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
+  * @brief  Disable the MPU Region.
+  * @retval None
+  */
+void HAL_MPU_DisableRegion(uint32_t RegionNumber)
+{
+  /* Check the parameters */
+  assert_param(IS_MPU_REGION_NUMBER(RegionNumber));
+
+  /* Set the Region number */
+  MPU->RNR = RegionNumber;
+
+  /* Disable the Region */
+  CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
+  * @brief  Initialize and configure the Region and the memory to be protected.
+  * @param  MPU_Init: Pointer to a MPU_Region_InitTypeDef structure that contains
+  *                the initialization and configuration information.
+  * @retval None
+  */
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
+{
+  /* Check the parameters */
+  assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
+  assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
+  assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
+  assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
+  assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
+  assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
+  assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
+  assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
+  assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
+  assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
+  /* Set the Region number */
+  MPU->RNR = MPU_Init->Number;
+
+/* Disable the Region */
+  CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+
+  /* Apply configuration */
+  MPU->RBAR = MPU_Init->BaseAddress;
+  MPU->RASR = ((uint32_t)MPU_Init->DisableExec             << MPU_RASR_XN_Pos)   |
+              ((uint32_t)MPU_Init->AccessPermission        << MPU_RASR_AP_Pos)   |
+              ((uint32_t)MPU_Init->TypeExtField            << MPU_RASR_TEX_Pos)  |
+              ((uint32_t)MPU_Init->IsShareable             << MPU_RASR_S_Pos)    |
+              ((uint32_t)MPU_Init->IsCacheable             << MPU_RASR_C_Pos)    |
+              ((uint32_t)MPU_Init->IsBufferable            << MPU_RASR_B_Pos)    |
+              ((uint32_t)MPU_Init->SubRegionDisable        << MPU_RASR_SRD_Pos)  |
+              ((uint32_t)MPU_Init->Size                    << MPU_RASR_SIZE_Pos) |
+              ((uint32_t)MPU_Init->Enable                  << MPU_RASR_ENABLE_Pos);
+}
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c

@@ -0,0 +1,307 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_hal_dma_ex.c
+  * @author  MCD Application Team
+  * @brief   DMA Extension HAL module driver
+  *         This file provides firmware functions to manage the following
+  *         functionalities of the DMA Extension peripheral:
+  *           + Extended features functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+  The DMA Extension HAL driver can be used as follows:
+
+   (+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function.
+   (+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function.
+       Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used
+       to respectively enable/disable the request generator.
+
+   (+) To handle the DMAMUX Interrupts, the function  HAL_DMAEx_MUX_IRQHandler should be called from
+       the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler.
+       As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMAEx_MUX_IRQHandler should be
+       called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project
+      (exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator)
+
+     -@-  In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
+     -@-  When Multi (Double) Buffer mode is enabled, the transfer is circular by default.
+     -@-  In Multi (Double) buffer mode, it is possible to update the base address for
+          the AHB memory port on the fly (DMA_CM0ARx or DMA_CM1ARx) when the channel is enabled.
+
+
+  @endverbatim
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+#if defined(DMAMUX1)
+
+/** @addtogroup STM32L4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DMAEx DMAEx
+  * @brief DMA Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private Constants ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+
+/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
+  * @{
+  */
+
+/** @defgroup DMAEx_Exported_Functions_Group1 DMAEx Extended features functions
+ *  @brief   Extended features functions
+ *
+@verbatim
+ ===============================================================================
+                #####  Extended features functions  #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+
+    (+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function.
+    (+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function.
+       Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used
+       to respectively enable/disable the request generator.
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Configure the DMAMUX synchronization parameters for a given DMA channel (instance).
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA channel.
+  * @param  pSyncConfig : pointer to HAL_DMA_MuxSyncConfigTypeDef : contains the DMAMUX synchronization parameters
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
+
+  assert_param(IS_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID));
+
+  assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig-> SyncPolarity));
+  assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable));
+  assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable));
+  assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber));
+
+  /*Check if the DMA state is ready */
+  if (hdma->State == HAL_DMA_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hdma);
+
+    /* Set the new synchronization parameters (and keep the request ID filled during the Init)*/
+    MODIFY_REG(hdma->DMAmuxChannel->CCR, \
+               (~DMAMUX_CxCR_DMAREQ_ID), \
+               ((pSyncConfig->SyncSignalID) << DMAMUX_CxCR_SYNC_ID_Pos) | ((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \
+               pSyncConfig->SyncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos) | \
+               ((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos));
+
+    /* Process UnLocked */
+    __HAL_UNLOCK(hdma);
+
+    return HAL_OK;
+  }
+  else
+  {
+    /*DMA State not Ready*/
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Configure the DMAMUX request generator block used by the given DMA channel (instance).
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA channel.
+  * @param  pRequestGeneratorConfig : pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef :
+  *         contains the request generator parameters.
+  *
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
+
+  assert_param(IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID));
+
+  assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity));
+  assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber));
+
+  /* check if the DMA state is ready
+     and DMA is using a DMAMUX request generator block
+  */
+  if ((hdma->State == HAL_DMA_STATE_READY) && (hdma->DMAmuxRequestGen != 0U))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hdma);
+
+    /* Set the request generator new parameters */
+    hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \
+                                   ((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos) | \
+                                   pRequestGeneratorConfig->Polarity;
+    /* Process UnLocked */
+    __HAL_UNLOCK(hdma);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Enable the DMAMUX request generator block used by the given DMA channel (instance).
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA channel.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
+
+  /* check if the DMA state is ready
+     and DMA is using a DMAMUX request generator block
+  */
+  if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0))
+  {
+
+    /* Enable the request generator*/
+    hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE;
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Disable the DMAMUX request generator block used by the given DMA channel (instance).
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA channel.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
+
+  /* check if the DMA state is ready
+     and DMA is using a DMAMUX request generator block
+  */
+  if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0))
+  {
+
+    /* Disable the request generator*/
+    hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE;
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Handles DMAMUX interrupt request.
+  * @param  hdma pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA channel.
+  * @retval None
+  */
+void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma)
+{
+  /* Check for DMAMUX Synchronization overrun */
+  if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U)
+  {
+    /* Disable the synchro overrun interrupt */
+    hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE;
+
+    /* Clear the DMAMUX synchro overrun flag */
+    hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
+
+    /* Update error code */
+    hdma->ErrorCode |= HAL_DMA_ERROR_SYNC;
+
+    if (hdma->XferErrorCallback != NULL)
+    {
+      /* Transfer error callback */
+      hdma->XferErrorCallback(hdma);
+    }
+  }
+
+  if (hdma->DMAmuxRequestGen != 0)
+  {
+    /* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */
+    if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U)
+    {
+      /* Disable the request gen overrun interrupt */
+      hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE;
+
+      /* Clear the DMAMUX request generator overrun flag */
+      hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask;
+
+      /* Update error code */
+      hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN;
+
+      if (hdma->XferErrorCallback != NULL)
+      {
+        /* Transfer error callback */
+        hdma->XferErrorCallback(hdma);
+      }
+    }
+  }
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* DMAMUX1 */

Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c

@@ -0,0 +1,638 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_hal_exti.c
+  * @author  MCD Application Team
+  * @brief   EXTI HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Extended Interrupts and events controller (EXTI) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+                    ##### EXTI Peripheral features #####
+  ==============================================================================
+  [..]
+    (+) Each Exti line can be configured within this driver.
+
+    (+) Exti line can be configured in 3 different modes
+        (++) Interrupt
+        (++) Event
+        (++) Both of them
+
+    (+) Configurable Exti lines can be configured with 3 different triggers
+        (++) Rising
+        (++) Falling
+        (++) Both of them
+
+    (+) When set in interrupt mode, configurable Exti lines have two different
+        interrupts pending registers which allow to distinguish which transition
+        occurs:
+        (++) Rising edge pending interrupt
+        (++) Falling
+
+    (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can
+        be selected through multiplexer.
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+
+    (#) Configure the EXTI line using HAL_EXTI_SetConfigLine().
+        (++) Choose the interrupt line number by setting "Line" member from
+             EXTI_ConfigTypeDef structure.
+        (++) Configure the interrupt and/or event mode using "Mode" member from
+             EXTI_ConfigTypeDef structure.
+        (++) For configurable lines, configure rising and/or falling trigger
+             "Trigger" member from EXTI_ConfigTypeDef structure.
+        (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel"
+             member from GPIO_InitTypeDef structure.
+
+    (#) Get current Exti configuration of a dedicated line using
+        HAL_EXTI_GetConfigLine().
+        (++) Provide exiting handle as parameter.
+        (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter.
+
+    (#) Clear Exti configuration of a dedicated line using HAL_EXTI_ClearConfigLine().
+        (++) Provide exiting handle as parameter.
+
+    (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback().
+        (++) Provide exiting handle as first parameter.
+        (++) Provide which callback will be registered using one value from
+             EXTI_CallbackIDTypeDef.
+        (++) Provide callback function pointer.
+
+    (#) Get interrupt pending bit using HAL_EXTI_GetPending().
+
+    (#) Clear interrupt pending bit using HAL_EXTI_ClearPending().
+
+    (#) Generate software interrupt using HAL_EXTI_GenerateSWI().
+
+  @endverbatim
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup EXTI
+  * @{
+  */
+/** MISRA C:2012 deviation rule has been granted for following rule:
+  * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out
+  * of bounds [0,3] in following API :
+  * HAL_EXTI_SetConfigLine
+  * HAL_EXTI_GetConfigLine
+  * HAL_EXTI_ClearConfigLine
+  */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines ------------------------------------------------------------*/
+/** @defgroup EXTI_Private_Constants EXTI Private Constants
+  * @{
+  */
+#define EXTI_MODE_OFFSET                    0x08u   /* 0x20: offset between MCU IMR/EMR registers */
+#define EXTI_CONFIG_OFFSET                  0x08u   /* 0x20: offset between MCU Rising/Falling configuration registers */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup EXTI_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup EXTI_Exported_Functions_Group1
+ *  @brief    Configuration functions
+ *
+@verbatim
+ ===============================================================================
+              ##### Configuration functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Set configuration of a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @param  pExtiConfig Pointer on EXTI configuration to be set.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
+{
+  __IO uint32_t *regaddr;
+  uint32_t regval;
+  uint32_t linepos;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Check null pointer */
+  if ((hexti == NULL) || (pExtiConfig == NULL))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(pExtiConfig->Line));
+  assert_param(IS_EXTI_MODE(pExtiConfig->Mode));
+
+  /* Assign line number to handle */
+  hexti->Line = pExtiConfig->Line;
+
+  /* Compute line register offset and line mask */
+  offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
+  maskline = (1uL << linepos);
+
+  /* Configure triggers for configurable lines */
+  if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
+  {
+    assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger));
+
+    /* Configure rising trigger */
+    regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset));
+    regval = *regaddr;
+
+    /* Mask or set line */
+    if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u)
+    {
+      regval |= maskline;
+    }
+    else
+    {
+      regval &= ~maskline;
+    }
+
+    /* Store rising trigger mode */
+    *regaddr = regval;
+
+    /* Configure falling trigger */
+    regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset));
+    regval = *regaddr;
+
+    /* Mask or set line */
+    if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u)
+    {
+      regval |= maskline;
+    }
+    else
+    {
+      regval &= ~maskline;
+    }
+
+    /* Store falling trigger mode */
+    *regaddr = regval;
+
+    /* Configure gpio port selection in case of gpio exti line */
+    if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
+    {
+      assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel));
+      assert_param(IS_EXTI_GPIO_PIN(linepos));
+
+      regval = SYSCFG->EXTICR[linepos >> 2u];
+      regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
+      regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
+      SYSCFG->EXTICR[linepos >> 2u] = regval;
+    }
+  }
+
+  /* Configure interrupt mode : read current mode */
+  regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset));
+  regval = *regaddr;
+
+  /* Mask or set line */
+  if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u)
+  {
+    regval |= maskline;
+  }
+  else
+  {
+    regval &= ~maskline;
+  }
+
+  /* Store interrupt mode */
+  *regaddr = regval;
+
+  /* The event mode cannot be configured if the line does not support it */
+  assert_param(((pExtiConfig->Line & EXTI_EVENT) == EXTI_EVENT) || ((pExtiConfig->Mode & EXTI_MODE_EVENT) != EXTI_MODE_EVENT));
+
+  /* Configure event mode : read current mode */
+  regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset));
+  regval = *regaddr;
+
+  /* Mask or set line */
+  if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u)
+  {
+    regval |= maskline;
+  }
+  else
+  {
+    regval &= ~maskline;
+  }
+
+  /* Store event mode */
+  *regaddr = regval;
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Get configuration of a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @param  pExtiConfig Pointer on structure to store Exti configuration.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
+{
+  __IO uint32_t *regaddr;
+  uint32_t regval;
+  uint32_t linepos;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Check null pointer */
+  if ((hexti == NULL) || (pExtiConfig == NULL))
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameter */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+
+  /* Store handle line number to configuration structure */
+  pExtiConfig->Line = hexti->Line;
+
+  /* Compute line register offset and line mask */
+  offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
+  maskline = (1uL << linepos);
+
+  /* 1] Get core mode : interrupt */
+  regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset));
+  regval = *regaddr;
+
+  /* Check if selected line is enable */
+  if ((regval & maskline) != 0x00u)
+  {
+    pExtiConfig->Mode = EXTI_MODE_INTERRUPT;
+  }
+  else
+  {
+    pExtiConfig->Mode = EXTI_MODE_NONE;
+  }
+
+  /* Get event mode */
+  regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset));
+  regval = *regaddr;
+
+  /* Check if selected line is enable */
+  if ((regval & maskline) != 0x00u)
+  {
+    pExtiConfig->Mode |= EXTI_MODE_EVENT;
+  }
+
+  /* Get default Trigger and GPIOSel configuration */
+  pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
+  pExtiConfig->GPIOSel = 0x00u;
+
+  /* 2] Get trigger for configurable lines : rising */
+  if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
+  {
+    regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset));
+    regval = *regaddr;
+
+    /* Check if configuration of selected line is enable */
+    if ((regval & maskline) != 0x00u)
+    {
+      pExtiConfig->Trigger = EXTI_TRIGGER_RISING;
+    }
+
+    /* Get falling configuration */
+    regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset));
+    regval = *regaddr;
+
+    /* Check if configuration of selected line is enable */
+    if ((regval & maskline) != 0x00u)
+    {
+      pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING;
+    }
+
+    /* Get Gpio port selection for gpio lines */
+    if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
+    {
+      assert_param(IS_EXTI_GPIO_PIN(linepos));
+
+      regval = SYSCFG->EXTICR[linepos >> 2u];
+      pExtiConfig->GPIOSel = (regval >> (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))) & SYSCFG_EXTICR1_EXTI0;
+    }
+  }
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Clear whole configuration of a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti)
+{
+  __IO uint32_t *regaddr;
+  uint32_t regval;
+  uint32_t linepos;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Check null pointer */
+  if (hexti == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameter */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+
+  /* compute line register offset and line mask */
+  offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  linepos = (hexti->Line & EXTI_PIN_MASK);
+  maskline = (1uL << linepos);
+
+  /* 1] Clear interrupt mode */
+  regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset));
+  regval = (*regaddr & ~maskline);
+  *regaddr = regval;
+
+  /* 2] Clear event mode */
+  regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset));
+  regval = (*regaddr & ~maskline);
+  *regaddr = regval;
+
+  /* 3] Clear triggers in case of configurable lines */
+  if ((hexti->Line & EXTI_CONFIG) != 0x00u)
+  {
+    regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset));
+    regval = (*regaddr & ~maskline);
+    *regaddr = regval;
+
+    regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset));
+    regval = (*regaddr & ~maskline);
+    *regaddr = regval;
+
+    /* Get Gpio port selection for gpio lines */
+    if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO)
+    {
+      assert_param(IS_EXTI_GPIO_PIN(linepos));
+
+      regval = SYSCFG->EXTICR[linepos >> 2u];
+      regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
+      SYSCFG->EXTICR[linepos >> 2u] = regval;
+    }
+  }
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Register callback for a dedicated Exti line.
+  * @param  hexti Exti handle.
+  * @param  CallbackID User callback identifier.
+  *         This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values.
+  * @param  pPendingCbfn function pointer to be stored as callback.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void))
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  switch (CallbackID)
+  {
+    case  HAL_EXTI_COMMON_CB_ID:
+      hexti->PendingCallback = pPendingCbfn;
+      break;
+
+    default:
+      status = HAL_ERROR;
+      break;
+  }
+
+  return status;
+}
+
+
+/**
+  * @brief  Store line number as handle private field.
+  * @param  hexti Exti handle.
+  * @param  ExtiLine Exti line number.
+  *         This parameter can be from 0 to @ref EXTI_LINE_NB.
+  * @retval HAL Status.
+  */
+HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine)
+{
+  /* Check the parameters */
+  assert_param(IS_EXTI_LINE(ExtiLine));
+
+  /* Check null pointer */
+  if (hexti == NULL)
+  {
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Store line number as handle private field */
+    hexti->Line = ExtiLine;
+
+    return HAL_OK;
+  }
+}
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup EXTI_Exported_Functions_Group2
+ *  @brief EXTI IO functions.
+ *
+@verbatim
+ ===============================================================================
+                       ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Handle EXTI interrupt request.
+  * @param  hexti Exti handle.
+  * @retval none.
+  */
+void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti)
+{
+  __IO uint32_t *regaddr;
+  uint32_t regval;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Compute line register offset and line mask */
+  offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
+
+  /* Get pending bit  */
+  regaddr = (&EXTI->PR1 + (EXTI_CONFIG_OFFSET * offset));
+  regval = (*regaddr & maskline);
+
+  if (regval != 0x00u)
+  {
+    /* Clear pending bit */
+    *regaddr = maskline;
+
+    /* Call callback */
+    if (hexti->PendingCallback != NULL)
+    {
+      hexti->PendingCallback();
+    }
+  }
+}
+
+
+/**
+  * @brief  Get interrupt pending bit of a dedicated line.
+  * @param  hexti Exti handle.
+  * @param  Edge Specify which pending edge as to be checked.
+  *         This parameter can be one of the following values:
+  *           @arg @ref EXTI_TRIGGER_RISING_FALLING
+  *         This parameter is kept for compatibility with other series.
+  * @retval 1 if interrupt is pending else 0.
+  */
+uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
+{
+  __IO uint32_t *regaddr;
+  uint32_t regval;
+  uint32_t linepos;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(Edge);
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+  assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
+  assert_param(IS_EXTI_PENDING_EDGE(Edge));
+
+  /* Compute line register offset and line mask */
+  offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  linepos = (hexti->Line & EXTI_PIN_MASK);
+  maskline = (1uL << linepos);
+
+  /* Get pending bit */
+  regaddr = (&EXTI->PR1 + (EXTI_CONFIG_OFFSET * offset));
+
+  /* return 1 if bit is set else 0 */
+  regval = ((*regaddr & maskline) >> linepos);
+  return regval;
+}
+
+
+/**
+  * @brief  Clear interrupt pending bit of a dedicated line.
+  * @param  hexti Exti handle.
+  * @param  Edge Specify which pending edge as to be clear.
+  *         This parameter can be one of the following values:
+  *           @arg @ref EXTI_TRIGGER_RISING_FALLING
+  *         This parameter is kept for compatibility with other series.
+  * @retval None.
+  */
+void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
+{
+  __IO uint32_t *regaddr;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(Edge);
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+  assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
+  assert_param(IS_EXTI_PENDING_EDGE(Edge));
+
+  /* compute line register offset and line mask */
+  offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
+
+  /* Get pending register address */
+  regaddr = (&EXTI->PR1 + (EXTI_CONFIG_OFFSET * offset));
+
+  /* Clear Pending bit */
+  *regaddr =  maskline;
+}
+
+
+/**
+  * @brief  Generate a software interrupt for a dedicated line.
+  * @param  hexti Exti handle.
+  * @retval None.
+  */
+void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti)
+{
+  __IO uint32_t *regaddr;
+  uint32_t maskline;
+  uint32_t offset;
+
+  /* Check parameters */
+  assert_param(IS_EXTI_LINE(hexti->Line));
+  assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
+
+  /* compute line register offset and line mask */
+  offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT);
+  maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
+
+  regaddr = (&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset));
+  *regaddr = maskline;
+}
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_EXTI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c

@@ -0,0 +1,764 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_hal_flash.c
+  * @author  MCD Application Team
+  * @brief   FLASH HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the internal FLASH memory:
+  *           + Program operations functions
+  *           + Memory Control functions
+  *           + Peripheral Errors functions
+  *
+ @verbatim
+  ==============================================================================
+                        ##### FLASH peripheral features #####
+  ==============================================================================
+
+  [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
+       to the Flash memory. It implements the erase and program Flash memory operations
+       and the read and write protection mechanisms.
+
+  [..] The Flash memory interface accelerates code execution with a system of instruction
+       prefetch and cache lines.
+
+  [..] The FLASH main features are:
+      (+) Flash memory read operations
+      (+) Flash memory program/erase operations
+      (+) Read / write protections
+      (+) Option bytes programming
+      (+) Prefetch on I-Code
+      (+) 32 cache lines of 4*64 bits on I-Code
+      (+) 8 cache lines of 4*64 bits on D-Code
+      (+) Error code correction (ECC) : Data in flash are 72-bits word
+          (8 bits added per double word)
+
+
+                        ##### How to use this driver #####
+ ==============================================================================
+    [..]
+      This driver provides functions and macros to configure and program the FLASH
+      memory of all STM32L4xx devices.
+
+      (#) Flash Memory IO Programming functions:
+           (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
+                HAL_FLASH_Lock() functions
+           (++) Program functions: double word and fast program (full row programming)
+           (++) There Two modes of programming :
+            (+++) Polling mode using HAL_FLASH_Program() function
+            (+++) Interrupt mode using HAL_FLASH_Program_IT() function
+
+      (#) Interrupts and flags management functions :
+           (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
+           (++) Callback functions are called when the flash operations are finished :
+                HAL_FLASH_EndOfOperationCallback() when everything is ok, otherwise
+                HAL_FLASH_OperationErrorCallback()
+           (++) Get error flag status by calling HAL_GetError()
+
+      (#) Option bytes management functions :
+           (++) Lock and Unlock the option bytes using HAL_FLASH_OB_Unlock() and
+                HAL_FLASH_OB_Lock() functions
+           (++) Launch the reload of the option bytes using HAL_FLASH_Launch() function.
+                In this case, a reset is generated
+
+    [..]
+      In addition to these functions, this driver includes a set of macros allowing
+      to handle the following operations:
+       (+) Set the latency
+       (+) Enable/Disable the prefetch buffer
+       (+) Enable/Disable the Instruction cache and the Data cache
+       (+) Reset the Instruction cache and the Data cache
+       (+) Enable/Disable the Flash power-down during low-power run and sleep modes
+       (+) Enable/Disable the Flash interrupts
+       (+) Monitor the Flash flags status
+
+ @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FLASH FLASH
+  * @brief FLASH HAL module driver
+  * @{
+  */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx)
+#define FLASH_NB_DOUBLE_WORDS_IN_ROW  64
+#else
+#define FLASH_NB_DOUBLE_WORDS_IN_ROW  32
+#endif
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Variables FLASH Private Variables
+ * @{
+ */
+/**
+  * @brief  Variable used for Program/Erase sectors under interruption
+  */
+FLASH_ProcessTypeDef pFlash = {.Lock = HAL_UNLOCKED, \
+                               .ErrorCode = HAL_FLASH_ERROR_NONE, \
+                               .ProcedureOnGoing = FLASH_PROC_NONE, \
+                               .Address = 0U, \
+                               .Bank = FLASH_BANK_1, \
+                               .Page = 0U, \
+                               .NbPagesToErase = 0U, \
+                               .CacheToReactivate = FLASH_CACHE_DISABLED};
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup FLASH_Private_Functions FLASH Private Functions
+ * @{
+ */
+static void          FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
+static void          FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
+  * @{
+  */
+
+/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
+ *  @brief   Programming operation functions
+ *
+@verbatim
+ ===============================================================================
+                  ##### Programming operation functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the FLASH
+    program operations.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Program double word or fast program of a row at a specified address.
+  * @param  TypeProgram  Indicate the way to program at a specified address.
+  *                           This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address  specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed
+  *                This parameter is the data for the double word program and the address where
+  *                are stored the data for the row fast program
+  *
+  * @retval HAL_StatusTypeDef HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status;
+  uint32_t prog_bit = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+    /* Deactivate the data cache if they are activated to avoid data misbehavior */
+    if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U)
+    {
+      /* Disable data cache  */
+      __HAL_FLASH_DATA_CACHE_DISABLE();
+      pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED;
+    }
+    else
+    {
+      pFlash.CacheToReactivate = FLASH_CACHE_DISABLED;
+    }
+
+    if(TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD)
+    {
+      /* Program double-word (64-bit) at a specified address */
+      FLASH_Program_DoubleWord(Address, Data);
+      prog_bit = FLASH_CR_PG;
+    }
+    else if((TypeProgram == FLASH_TYPEPROGRAM_FAST) || (TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST))
+    {
+      /* Fast program a 32 row double-word (64-bit) at a specified address */
+      FLASH_Program_Fast(Address, (uint32_t)Data);
+
+      /* If it is the last row, the bit will be cleared at the end of the operation */
+      if(TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST)
+      {
+        prog_bit = FLASH_CR_FSTPG;
+      }
+    }
+    else
+    {
+      /* Nothing to do */
+    }
+
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+    /* If the program operation is completed, disable the PG or FSTPG Bit */
+    if (prog_bit != 0U)
+    {
+      CLEAR_BIT(FLASH->CR, prog_bit);
+    }
+
+    /* Flush the caches to be sure of the data consistency */
+    FLASH_FlushCaches();
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+
+  return status;
+}
+
+/**
+  * @brief  Program double word or fast program of a row at a specified address with interrupt enabled.
+  * @param  TypeProgram  Indicate the way to program at a specified address.
+  *                           This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address  specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed
+  *                This parameter is the data for the double word program and the address where
+  *                are stored the data for the row fast program
+  *
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+
+  /* Deactivate the data cache if they are activated to avoid data misbehavior */
+  if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U)
+  {
+    /* Disable data cache  */
+    __HAL_FLASH_DATA_CACHE_DISABLE();
+    pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED;
+  }
+  else
+  {
+    pFlash.CacheToReactivate = FLASH_CACHE_DISABLED;
+  }
+
+  /* Set internal variables used by the IRQ handler */
+  if(TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST)
+  {
+    pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM_LAST;
+  }
+  else
+  {
+    pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
+  }
+  pFlash.Address = Address;
+
+  /* Enable End of Operation and Error interrupts */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR);
+
+  if(TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD)
+  {
+    /* Program double-word (64-bit) at a specified address */
+    FLASH_Program_DoubleWord(Address, Data);
+  }
+  else if((TypeProgram == FLASH_TYPEPROGRAM_FAST) || (TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST))
+  {
+    /* Fast program a 32 row double-word (64-bit) at a specified address */
+    FLASH_Program_Fast(Address, (uint32_t)Data);
+  }
+  else
+  {
+    /* Nothing to do */
+  }
+
+  return status;
+}
+
+/**
+  * @brief Handle FLASH interrupt request.
+  * @retval None
+  */
+void HAL_FLASH_IRQHandler(void)
+{
+  uint32_t tmp_page;
+  uint32_t error;
+  FLASH_ProcedureTypeDef procedure;
+
+  /* If the operation is completed, disable the PG, PNB, MER1, MER2 and PER Bit */
+  CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_MER1 | FLASH_CR_PER | FLASH_CR_PNB));
+#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \
+    defined (STM32L496xx) || defined (STM32L4A6xx) || \
+    defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \
+    defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx)
+  CLEAR_BIT(FLASH->CR, FLASH_CR_MER2);
+#endif
+
+  /* Disable the FSTPG Bit only if it is the last row programmed */
+  if(pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAM_LAST)
+  {
+    CLEAR_BIT(FLASH->CR, FLASH_CR_FSTPG);
+  }
+
+  /* Check FLASH operation error flags */
+  error = (FLASH->SR & FLASH_FLAG_SR_ERRORS);
+
+  if (error !=0U)
+  {
+    /*Save the error code*/
+    pFlash.ErrorCode |= error;
+
+    /* Clear error programming flags */
+    __HAL_FLASH_CLEAR_FLAG(error);
+
+    /* Flush the caches to be sure of the data consistency */
+    FLASH_FlushCaches() ;
+
+    /* FLASH error interrupt user callback */
+    procedure = pFlash.ProcedureOnGoing;
+    if(procedure == FLASH_PROC_PAGE_ERASE)
+    {
+       HAL_FLASH_OperationErrorCallback(pFlash.Page);
+    }
+    else if(procedure == FLASH_PROC_MASS_ERASE)
+    {
+        HAL_FLASH_OperationErrorCallback(pFlash.Bank);
+    }
+    else if((procedure == FLASH_PROC_PROGRAM) ||
+            (procedure == FLASH_PROC_PROGRAM_LAST))
+    {
+       HAL_FLASH_OperationErrorCallback(pFlash.Address);
+    }
+    else
+    {
+       HAL_FLASH_OperationErrorCallback(0U);
+    }
+
+    /*Stop the procedure ongoing*/
+    pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+  }
+
+  /* Check FLASH End of Operation flag  */
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != 0U)
+  {
+    /* Clear FLASH End of Operation pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+
+    if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGE_ERASE)
+    {
+      /* Nb of pages to erased can be decreased */
+      pFlash.NbPagesToErase--;
+
+      /* Check if there are still pages to erase*/
+      if(pFlash.NbPagesToErase != 0U)
+      {
+        /* Indicate user which page has been erased*/
+        HAL_FLASH_EndOfOperationCallback(pFlash.Page);
+
+        /* Increment page number */
+        pFlash.Page++;
+        tmp_page = pFlash.Page;
+        FLASH_PageErase(tmp_page, pFlash.Bank);
+      }
+      else
+      {
+        /* No more pages to Erase */
+        /* Reset Address and stop Erase pages procedure */
+        pFlash.Page = 0xFFFFFFFFU;
+        pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+
+        /* Flush the caches to be sure of the data consistency */
+        FLASH_FlushCaches() ;
+
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(pFlash.Page);
+      }
+    }
+    else
+    {
+      /* Flush the caches to be sure of the data consistency */
+      FLASH_FlushCaches() ;
+
+      procedure = pFlash.ProcedureOnGoing;
+      if(procedure == FLASH_PROC_MASS_ERASE)
+      {
+        /* MassErase ended. Return the selected bank */
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(pFlash.Bank);
+      }
+      else if((procedure == FLASH_PROC_PROGRAM) ||
+              (procedure == FLASH_PROC_PROGRAM_LAST))
+      {
+        /* Program ended. Return the selected address */
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+      }
+      else
+      {
+        /* Nothing to do */
+      }
+
+      /*Clear the procedure ongoing*/
+      pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+    }
+  }
+
+  if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
+  {
+    /* Disable End of Operation and Error interrupts */
+    __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(&pFlash);
+  }
+}
+
+/**
+  * @brief  FLASH end of operation interrupt callback.
+  * @param  ReturnValue The value saved in this parameter depends on the ongoing procedure
+  *                  Mass Erase: Bank number which has been requested to erase
+  *                  Page Erase: Page which has been erased
+  *                    (if 0xFFFFFFFF, it means that all the selected pages have been erased)
+  *                  Program: Address which was selected for data program
+  * @retval None
+  */
+__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(ReturnValue);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  FLASH operation error interrupt callback.
+  * @param  ReturnValue The value saved in this parameter depends on the ongoing procedure
+  *                 Mass Erase: Bank number which has been requested to erase
+  *                 Page Erase: Page number which returned an error
+  *                 Program: Address which was selected for data program
+  * @retval None
+  */
+__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(ReturnValue);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_FLASH_OperationErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
+ *  @brief   Management functions
+ *
+@verbatim
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the FLASH
+    memory operations.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Unlock the FLASH control register access.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0U)
+  {
+    /* Authorize the FLASH Registers access */
+    WRITE_REG(FLASH->KEYR, FLASH_KEY1);
+    WRITE_REG(FLASH->KEYR, FLASH_KEY2);
+
+    /* Verify Flash is unlocked */
+    if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0U)
+    {
+      status = HAL_ERROR;
+    }
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Lock the FLASH control register access.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Lock(void)
+{
+  /* Set the LOCK Bit to lock the FLASH Registers access */
+  SET_BIT(FLASH->CR, FLASH_CR_LOCK);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Unlock the FLASH Option Bytes Registers access.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
+{
+  if(READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0U)
+  {
+    /* Authorizes the Option Byte register programming */
+    WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1);
+    WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2);
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Lock the FLASH Option Bytes Registers access.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
+{
+  /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
+  SET_BIT(FLASH->CR, FLASH_CR_OPTLOCK);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Launch the option byte loading.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
+{
+  /* Set the bit to force the option byte reloading */
+  SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH);
+
+  /* Wait for last operation to be completed */
+  return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions
+ *  @brief   Peripheral Errors functions
+ *
+@verbatim
+ ===============================================================================
+                ##### Peripheral Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection permits to get in run-time Errors of the FLASH peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Get the specific FLASH error flag.
+  * @retval FLASH_ErrorCode: The returned value can be:
+  *            @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP)
+  *            @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag
+  *            @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag
+  *            @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag
+  *            @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag
+  *            @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag
+  *            @arg HAL_FLASH_ERROR_NONE: No error set
+  *            @arg HAL_FLASH_ERROR_OP: FLASH Operation error
+  *            @arg HAL_FLASH_ERROR_PROG: FLASH Programming error
+  *            @arg HAL_FLASH_ERROR_WRP: FLASH Write protection error
+  *            @arg HAL_FLASH_ERROR_PGA: FLASH Programming alignment error
+  *            @arg HAL_FLASH_ERROR_SIZ: FLASH Size error
+  *            @arg HAL_FLASH_ERROR_PGS: FLASH Programming sequence error
+  *            @arg HAL_FLASH_ERROR_MIS: FLASH Fast programming data miss error
+  *            @arg HAL_FLASH_ERROR_FAST: FLASH Fast programming error
+  *            @arg HAL_FLASH_ERROR_RD: FLASH PCROP read error
+  *            @arg HAL_FLASH_ERROR_OPTV: FLASH Option validity error
+  *            @arg FLASH_FLAG_PEMPTY : FLASH Boot from not programmed flash (apply only for STM32L43x/STM32L44x devices)
+  */
+uint32_t HAL_FLASH_GetError(void)
+{
+   return pFlash.ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @addtogroup FLASH_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Wait for a FLASH operation to complete.
+  * @param  Timeout maximum flash operation timeout
+  * @retval HAL_StatusTypeDef HAL Status
+  */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
+{
+  /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+     Even if the FLASH operation fails, the BUSY flag will be reset and an error
+     flag will be set */
+
+  uint32_t tickstart = HAL_GetTick();
+  uint32_t error;
+
+  while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY))
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart) >= Timeout)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  error = (FLASH->SR & FLASH_FLAG_SR_ERRORS);
+
+  if(error != 0u)
+  {
+    /*Save the error code*/
+    pFlash.ErrorCode |= error;
+
+    /* Clear error programming flags */
+    __HAL_FLASH_CLEAR_FLAG(error);
+
+    return HAL_ERROR;
+  }
+
+  /* Check FLASH End of Operation flag  */
+  if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
+  {
+    /* Clear FLASH End of Operation pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+  }
+
+  /* If there is an error flag set */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Program double-word (64-bit) at a specified address.
+  * @param  Address specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
+
+  /* Set PG bit */
+  SET_BIT(FLASH->CR, FLASH_CR_PG);
+
+  /* Program first word */
+  *(__IO uint32_t*)Address = (uint32_t)Data;
+
+  /* Barrier to ensure programming is performed in 2 steps, in right order
+    (independently of compiler optimization behavior) */
+  __ISB();
+
+  /* Program second word */
+  *(__IO uint32_t*)(Address+4U) = (uint32_t)(Data >> 32);
+}
+
+/**
+  * @brief  Fast program a row double-word (64-bit) at a specified address.
+  * @param  Address specifies the address to be programmed.
+  * @param  DataAddress specifies the address where the data are stored.
+  * @retval None
+  */
+static void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress)
+{
+  uint32_t primask_bit;
+  uint8_t row_index = (2*FLASH_NB_DOUBLE_WORDS_IN_ROW);
+  __IO uint32_t *dest_addr = (__IO uint32_t*)Address;
+  __IO uint32_t *src_addr = (__IO uint32_t*)DataAddress;
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_MAIN_MEM_ADDRESS(Address));
+
+  /* Set FSTPG bit */
+  SET_BIT(FLASH->CR, FLASH_CR_FSTPG);
+
+  /* Disable interrupts to avoid any interruption during the loop */
+  primask_bit = __get_PRIMASK();
+  __disable_irq();
+
+  /* Program the double word of the row */
+  do
+  {
+    *dest_addr = *src_addr;
+    dest_addr++;
+    src_addr++;
+    row_index--;
+  } while (row_index != 0U);
+
+  /* Re-enable the interrupts */
+  __set_PRIMASK(primask_bit);
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c

@@ -0,0 +1,251 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_hal_flash_ramfunc.c
+  * @author  MCD Application Team
+  * @brief   FLASH RAMFUNC driver.
+  *          This file provides a Flash firmware functions which should be
+  *          executed from internal SRAM
+  *            + FLASH HalfPage Programming
+  *            + FLASH Power Down in Run mode
+  *
+  *  @verbatim
+  ==============================================================================
+                   ##### Flash RAM functions #####
+  ==============================================================================
+
+    *** ARM Compiler ***
+    --------------------
+    [..] RAM functions are defined using the toolchain options.
+         Functions that are executed in RAM should reside in a separate
+         source module. Using the 'Options for File' dialog you can simply change
+         the 'Code / Const' area of a module to a memory space in physical RAM.
+         Available memory areas are declared in the 'Target' tab of the
+         Options for Target' dialog.
+
+    *** ICCARM Compiler ***
+    -----------------------
+    [..] RAM functions are defined using a specific toolchain keyword "__ramfunc".
+
+    *** GNU Compiler ***
+    --------------------
+    [..] RAM functions are defined using a specific toolchain attribute
+         "__attribute__((section(".RamFunc")))".
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FLASH_RAMFUNC FLASH_RAMFUNC
+  * @brief FLASH functions executed from RAM
+  * @{
+  */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions -------------------------------------------------------*/
+
+/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH in RAM function Exported Functions
+  * @{
+  */
+
+/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions
+ *  @brief   Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+                      ##### ramfunc functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions that should be executed from RAM.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief   Enable the Power down in Run Mode
+  * @note    This function should be called and executed from SRAM memory
+  * @retval  HAL status
+  */
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableRunPowerDown(void)
+{
+  /* Enable the Power Down in Run mode*/
+  __HAL_FLASH_POWER_DOWN_ENABLE();
+
+  return HAL_OK;
+
+}
+
+/**
+  * @brief   Disable the Power down in Run Mode
+  * @note    This function should be called and executed from SRAM memory
+  * @retval  HAL status
+  */
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableRunPowerDown(void)
+{
+  /* Disable the Power Down in Run mode*/
+  __HAL_FLASH_POWER_DOWN_DISABLE();
+
+  return HAL_OK;
+}
+
+#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx)
+/**
+  * @brief  Program the FLASH DBANK User Option Byte.
+  *
+  * @note   To configure the user option bytes, the option lock bit OPTLOCK must
+  *         be cleared with the call of the HAL_FLASH_OB_Unlock() function.
+  * @note   To modify the DBANK option byte, no PCROP region should be defined.
+  *         To deactivate PCROP, user should perform RDP changing
+  *
+  * @param  DBankConfig The FLASH DBANK User Option Byte value.
+  *          This parameter  can be one of the following values:
+  *            @arg OB_DBANK_128_BITS: Single-bank with 128-bits data
+  *            @arg OB_DBANK_64_BITS: Dual-bank with 64-bits data
+  *
+  * @retval HAL status
+  */
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_OB_DBankConfig(uint32_t DBankConfig)
+{
+  uint32_t count, reg;
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check if the PCROP is disabled */
+  reg = FLASH->PCROP1SR;
+  if (reg > FLASH->PCROP1ER)
+  {
+    reg = FLASH->PCROP2SR;
+    if (reg > FLASH->PCROP2ER)
+    {
+      /* Disable Flash prefetch */
+      __HAL_FLASH_PREFETCH_BUFFER_DISABLE();
+
+      if (READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U)
+      {
+        /* Disable Flash instruction cache */
+        __HAL_FLASH_INSTRUCTION_CACHE_DISABLE();
+
+        /* Flush Flash instruction cache */
+        __HAL_FLASH_INSTRUCTION_CACHE_RESET();
+      }
+
+      if (READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U)
+      {
+        /* Disable Flash data cache */
+        __HAL_FLASH_DATA_CACHE_DISABLE();
+
+        /* Flush Flash data cache */
+        __HAL_FLASH_DATA_CACHE_RESET();
+      }
+
+      /* Disable WRP zone 1 of 1st bank if needed */
+      reg = FLASH->WRP1AR;
+      if (((reg & FLASH_WRP1AR_WRP1A_STRT) >> FLASH_WRP1AR_WRP1A_STRT_Pos) <=
+          ((reg & FLASH_WRP1AR_WRP1A_END) >> FLASH_WRP1AR_WRP1A_END_Pos))
+      {
+        MODIFY_REG(FLASH->WRP1AR, (FLASH_WRP1AR_WRP1A_STRT | FLASH_WRP1AR_WRP1A_END), FLASH_WRP1AR_WRP1A_STRT);
+      }
+
+      /* Disable WRP zone 2 of 1st bank if needed */
+      reg = FLASH->WRP1BR;
+      if (((reg & FLASH_WRP1BR_WRP1B_STRT) >> FLASH_WRP1BR_WRP1B_STRT_Pos) <=
+          ((reg & FLASH_WRP1BR_WRP1B_END) >> FLASH_WRP1BR_WRP1B_END_Pos))
+      {
+        MODIFY_REG(FLASH->WRP1BR, (FLASH_WRP1BR_WRP1B_STRT | FLASH_WRP1BR_WRP1B_END), FLASH_WRP1BR_WRP1B_STRT);
+      }
+
+      /* Disable WRP zone 1 of 2nd bank if needed */
+      reg = FLASH->WRP2AR;
+      if (((reg & FLASH_WRP2AR_WRP2A_STRT) >> FLASH_WRP2AR_WRP2A_STRT_Pos) <=
+          ((reg & FLASH_WRP2AR_WRP2A_END) >> FLASH_WRP2AR_WRP2A_END_Pos))
+      {
+        MODIFY_REG(FLASH->WRP2AR, (FLASH_WRP2AR_WRP2A_STRT | FLASH_WRP2AR_WRP2A_END), FLASH_WRP2AR_WRP2A_STRT);
+      }
+
+      /* Disable WRP zone 2 of 2nd bank if needed */
+      reg = FLASH->WRP2BR;
+      if (((reg & FLASH_WRP2BR_WRP2B_STRT) >> FLASH_WRP2BR_WRP2B_STRT_Pos) <=
+          ((reg & FLASH_WRP2BR_WRP2B_END) >> FLASH_WRP2BR_WRP2B_END_Pos))
+      {
+        MODIFY_REG(FLASH->WRP2BR, (FLASH_WRP2BR_WRP2B_STRT | FLASH_WRP2BR_WRP2B_END), FLASH_WRP2BR_WRP2B_STRT);
+      }
+
+      /* Modify the DBANK user option byte */
+      MODIFY_REG(FLASH->OPTR, FLASH_OPTR_DBANK, DBankConfig);
+
+      /* Set OPTSTRT Bit */
+      SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT);
+
+      /* Wait for last operation to be completed */
+      /* 8 is the number of required instruction cycles for the below loop statement (timeout expressed in ms) */
+      count = FLASH_TIMEOUT_VALUE * (SystemCoreClock / 8U / 1000U);
+      do
+      {
+        if (count == 0U)
+        {
+          break;
+        }
+        count--;
+      } while (__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET);
+
+      /* If the option byte program operation is completed, disable the OPTSTRT Bit */
+      CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT);
+
+      /* Set the bit to force the option byte reloading */
+      SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH);
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+
+  return status;
+}
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+
+

Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c

@@ -0,0 +1,551 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_hal_gpio.c
+  * @author  MCD Application Team
+  * @brief   GPIO HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the General Purpose Input/Output (GPIO) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+                    ##### GPIO Peripheral features #####
+  ==============================================================================
+  [..]
+    (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually
+        configured by software in several modes:
+        (++) Input mode
+        (++) Analog mode
+        (++) Output mode
+        (++) Alternate function mode
+        (++) External interrupt/event lines
+
+    (+) During and just after reset, the alternate functions and external interrupt
+        lines are not active and the I/O ports are configured in input floating mode.
+
+    (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be
+        activated or not.
+
+    (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull
+        type and the IO speed can be selected depending on the VDD value.
+
+    (+) The microcontroller IO pins are connected to onboard peripherals/modules through a
+        multiplexer that allows only one peripheral alternate function (AF) connected
+       to an IO pin at a time. In this way, there can be no conflict between peripherals
+       sharing the same IO pin.
+
+    (+) All ports have external interrupt/event capability. To use external interrupt
+        lines, the port must be configured in input mode. All available GPIO pins are
+        connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
+
+    (+) The external interrupt/event controller consists of up to 39 edge detectors
+        (16 lines are connected to GPIO) for generating event/interrupt requests (each
+        input line can be independently configured to select the type (interrupt or event)
+        and the corresponding trigger event (rising or falling or both). Each line can
+        also be masked independently.
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
+
+    (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
+        (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
+        (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
+             structure.
+        (++) In case of Output or alternate function mode selection: the speed is
+             configured through "Speed" member from GPIO_InitTypeDef structure.
+        (++) In alternate mode is selection, the alternate function connected to the IO
+             is configured through "Alternate" member from GPIO_InitTypeDef structure.
+        (++) Analog mode is required when a pin is to be used as ADC channel
+             or DAC output.
+        (++) In case of external interrupt/event selection the "Mode" member from
+             GPIO_InitTypeDef structure select the type (interrupt or event) and
+             the corresponding trigger event (rising or falling or both).
+
+    (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
+        mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
+        HAL_NVIC_EnableIRQ().
+
+    (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
+
+    (#) To set/reset the level of a pin configured in output mode use
+        HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
+
+   (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
+
+    (#) During and just after reset, the alternate functions are not
+        active and the GPIO pins are configured in input floating mode (except JTAG
+        pins).
+
+    (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
+        (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
+        priority over the GPIO function.
+
+    (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
+        general purpose PH0 and PH1, respectively, when the HSE oscillator is off.
+        The HSE has priority over the GPIO function.
+
+  @endverbatim
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup GPIO GPIO
+  * @brief GPIO HAL module driver
+  * @{
+  */
+/** MISRA C:2012 deviation rule has been granted for following rules:
+  * Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of
+  * range of the shift operator in following API :
+  * HAL_GPIO_Init
+  * HAL_GPIO_DeInit
+  */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Defines GPIO Private Defines
+  * @{
+  */
+#define GPIO_NUMBER           (16u)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+  * @{
+  */
+
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init.
+  * @param  GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family
+  * @param  GPIO_Init pointer to a GPIO_InitTypeDef structure that contains
+  *         the configuration information for the specified GPIO peripheral.
+  * @retval None
+  */
+void HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{
+  uint32_t position = 0x00u;
+  uint32_t iocurrent;
+  uint32_t temp;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+  assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+
+  /* Configure the port pins */
+  while (((GPIO_Init->Pin) >> position) != 0x00u)
+  {
+    /* Get current io position */
+    iocurrent = (GPIO_Init->Pin) & (1uL << position);
+
+    if (iocurrent != 0x00u)
+    {
+      /*--------------------- GPIO Mode Configuration ------------------------*/
+      /* In case of Output or Alternate function mode selection */
+      if (((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF))
+      {
+        /* Check the Speed parameter */
+        assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+
+        /* Configure the IO Speed */
+        temp = GPIOx->OSPEEDR;
+        temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u));
+        temp |= (GPIO_Init->Speed << (position * 2u));
+        GPIOx->OSPEEDR = temp;
+
+        /* Configure the IO Output Type */
+        temp = GPIOx->OTYPER;
+        temp &= ~(GPIO_OTYPER_OT0 << position) ;
+        temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position);
+        GPIOx->OTYPER = temp;
+      }
+
+#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx)
+
+      /* In case of Analog mode, check if ADC control mode is selected */
+      if((GPIO_Init->Mode & GPIO_MODE_ANALOG) == GPIO_MODE_ANALOG)
+      {
+        /* Configure the IO Output Type */
+        temp = GPIOx->ASCR;
+        temp &= ~(GPIO_ASCR_ASC0 << position) ;
+        temp |= (((GPIO_Init->Mode & GPIO_MODE_ANALOG_ADC_CONTROL) >> 3) << position);
+        GPIOx->ASCR = temp;
+      }
+
+#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */
+
+      /* Activate the Pull-up or Pull down resistor for the current IO */
+      if ((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG)
+      {
+        /* Check the Pull parameter */
+        assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+        temp = GPIOx->PUPDR;
+        temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2U));
+        temp |= ((GPIO_Init->Pull) << (position * 2U));
+        GPIOx->PUPDR = temp;
+      }
+
+      /* In case of Alternate function mode selection */
+      if ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)
+      {
+        /* Check the Alternate function parameters */
+        assert_param(IS_GPIO_AF_INSTANCE(GPIOx));
+        assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+
+        /* Configure Alternate function mapped with the current IO */
+        temp = GPIOx->AFR[position >> 3u];
+        temp &= ~(0xFu << ((position & 0x07u) * 4u));
+        temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u));
+        GPIOx->AFR[position >> 3u] = temp;
+      }
+
+      /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+      temp = GPIOx->MODER;
+      temp &= ~(GPIO_MODER_MODE0 << (position * 2u));
+      temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u));
+      GPIOx->MODER = temp;
+
+      /*--------------------- EXTI Mode Configuration ------------------------*/
+      /* Configure the External Interrupt or event for the current IO */
+      if ((GPIO_Init->Mode & EXTI_MODE) != 0x00u)
+      {
+        /* Enable SYSCFG Clock */
+        __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+        temp = SYSCFG->EXTICR[position >> 2u];
+        temp &= ~(0x0FuL << (4u * (position & 0x03u)));
+        temp |= (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u)));
+        SYSCFG->EXTICR[position >> 2u] = temp;
+
+        /* Clear Rising Falling edge configuration */
+        temp = EXTI->RTSR1;
+        temp &= ~(iocurrent);
+        if ((GPIO_Init->Mode & TRIGGER_RISING) != 0x00u)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->RTSR1 = temp;
+
+        temp = EXTI->FTSR1;
+        temp &= ~(iocurrent);
+        if ((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00u)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->FTSR1 = temp;
+
+        /* Clear EXTI line configuration */
+        temp = EXTI->EMR1;
+        temp &= ~(iocurrent);
+        if ((GPIO_Init->Mode & EXTI_EVT) != 0x00u)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->EMR1 = temp;
+
+        temp = EXTI->IMR1;
+        temp &= ~(iocurrent);
+        if ((GPIO_Init->Mode & EXTI_IT) != 0x00u)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->IMR1 = temp;
+      }
+    }
+
+    position++;
+  }
+}
+
+/**
+  * @brief  De-initialize the GPIOx peripheral registers to their default reset values.
+  * @param  GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family
+  * @param  GPIO_Pin specifies the port bit to be written.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
+  * @retval None
+  */
+void HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin)
+{
+  uint32_t position = 0x00u;
+  uint32_t iocurrent;
+  uint32_t tmp;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  /* Configure the port pins */
+  while ((GPIO_Pin >> position) != 0x00u)
+  {
+    /* Get current io position */
+    iocurrent = (GPIO_Pin) & (1uL << position);
+
+    if (iocurrent != 0x00u)
+    {
+      /*------------------------- EXTI Mode Configuration --------------------*/
+      /* Clear the External Interrupt or Event for the current IO */
+
+      tmp = SYSCFG->EXTICR[position >> 2u];
+      tmp &= (0x0FuL << (4u * (position & 0x03u)));
+      if (tmp == (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u))))
+      {
+        /* Clear EXTI line configuration */
+        EXTI->IMR1 &= ~(iocurrent);
+        EXTI->EMR1 &= ~(iocurrent);
+
+        /* Clear Rising Falling edge configuration */
+        EXTI->FTSR1 &= ~(iocurrent);
+        EXTI->RTSR1 &= ~(iocurrent);
+
+        tmp = 0x0FuL << (4u * (position & 0x03u));
+        SYSCFG->EXTICR[position >> 2u] &= ~tmp;
+      }
+
+      /*------------------------- GPIO Mode Configuration --------------------*/
+      /* Configure IO in Analog Mode */
+      GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2u));
+
+      /* Configure the default Alternate Function in current IO */
+      GPIOx->AFR[position >> 3u] &= ~(0xFu << ((position & 0x07u) * 4u)) ;
+
+      /* Configure the default value for IO Speed */
+      GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u));
+
+      /* Configure the default value IO Output Type */
+      GPIOx->OTYPER  &= ~(GPIO_OTYPER_OT0 << position) ;
+
+      /* Deactivate the Pull-up and Pull-down resistor for the current IO */
+      GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2u));
+
+#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx)
+      /* Deactivate the Control bit of Analog mode for the current IO */
+      GPIOx->ASCR &= ~(GPIO_ASCR_ASC0<< position);
+#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */
+    }
+
+    position++;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
+ *  @brief GPIO Read, Write, Toggle, Lock and EXTI management functions.
+ *
+@verbatim
+ ===============================================================================
+                       ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Read the specified input port pin.
+  * @param  GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family
+  * @param  GPIO_Pin specifies the port bit to read.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
+  * @retval The input port pin value.
+  */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  GPIO_PinState bitstatus;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  if ((GPIOx->IDR & GPIO_Pin) != 0x00u)
+  {
+    bitstatus = GPIO_PIN_SET;
+  }
+  else
+  {
+    bitstatus = GPIO_PIN_RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Set or clear the selected data port bit.
+  *
+  * @note   This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify
+  *         accesses. In this way, there is no risk of an IRQ occurring between
+  *         the read and the modify access.
+  *
+  * @param  GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family
+  * @param  GPIO_Pin specifies the port bit to be written.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
+  * @param  PinState specifies the value to be written to the selected bit.
+  *         This parameter can be one of the GPIO_PinState enum values:
+  *            @arg GPIO_PIN_RESET: to clear the port pin
+  *            @arg GPIO_PIN_SET: to set the port pin
+  * @retval None
+  */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+  assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+  if(PinState != GPIO_PIN_RESET)
+  {
+    GPIOx->BSRR = (uint32_t)GPIO_Pin;
+  }
+  else
+  {
+    GPIOx->BRR = (uint32_t)GPIO_Pin;
+  }
+}
+
+/**
+  * @brief  Toggle the specified GPIO pin.
+  * @param  GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family
+  * @param  GPIO_Pin specifies the pin to be toggled.
+  * @retval None
+  */
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  uint32_t odr;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  /* get current Output Data Register value */
+  odr = GPIOx->ODR;
+
+  /* Set selected pins that were at low level, and reset ones that were high */
+  GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin);
+}
+
+/**
+* @brief  Lock GPIO Pins configuration registers.
+  * @note   The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+  *         GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+  * @note   The configuration of the locked GPIO pins can no longer be modified
+  *         until the next reset.
+  * @param  GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family
+  * @param  GPIO_Pin specifies the port bits to be locked.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  __IO uint32_t tmp = GPIO_LCKR_LCKK;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  /* Apply lock key write sequence */
+  tmp |= GPIO_Pin;
+  /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+  GPIOx->LCKR = tmp;
+  /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
+  GPIOx->LCKR = GPIO_Pin;
+  /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+  GPIOx->LCKR = tmp;
+  /* Read LCKK register. This read is mandatory to complete key lock sequence */
+  tmp = GPIOx->LCKR;
+
+  /* Read again in order to confirm lock is active */
+  if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00u)
+  {
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Handle EXTI interrupt request.
+  * @param  GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
+  * @retval None
+  */
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
+{
+  /* EXTI line interrupt detected */
+  if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != 0x00u)
+  {
+    __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
+    HAL_GPIO_EXTI_Callback(GPIO_Pin);
+  }
+}
+
+/**
+  * @brief  EXTI line detection callback.
+  * @param  GPIO_Pin Specifies the port pin connected to corresponding EXTI line.
+  * @retval None
+  */
+__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(GPIO_Pin);
+
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_GPIO_EXTI_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+#endif /* HAL_GPIO_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+

Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c

@@ -0,0 +1,368 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_hal_i2c_ex.c
+  * @author  MCD Application Team
+  * @brief   I2C Extended HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of I2C Extended peripheral:
+  *           + Filter Mode Functions
+  *           + WakeUp Mode Functions
+  *           + FastModePlus Functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  @verbatim
+  ==============================================================================
+               ##### I2C peripheral Extended features  #####
+  ==============================================================================
+
+  [..] Comparing to other previous devices, the I2C interface for STM32L4xx
+       devices contains the following additional features
+
+       (+) Possibility to disable or enable Analog Noise Filter
+       (+) Use of a configured Digital Noise Filter
+       (+) Disable or enable wakeup from Stop mode(s)
+       (+) Disable or enable Fast Mode Plus
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..] This driver provides functions to configure Noise Filter and Wake Up Feature
+    (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter()
+    (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter()
+    (#) Configure the enable or disable of I2C Wake Up Mode using the functions :
+          (++) HAL_I2CEx_EnableWakeUp()
+          (++) HAL_I2CEx_DisableWakeUp()
+    (#) Configure the enable or disable of fast mode plus driving capability using the functions :
+          (++) HAL_I2CEx_EnableFastModePlus()
+          (++) HAL_I2CEx_DisableFastModePlus()
+  @endverbatim
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup I2CEx I2CEx
+  * @brief I2C Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions
+  * @{
+  */
+
+/** @defgroup I2CEx_Exported_Functions_Group1 Filter Mode Functions
+  * @brief    Filter Mode Functions
+  *
+@verbatim
+ ===============================================================================
+                      ##### Filter Mode Functions #####
+ ===============================================================================
+    [..] This section provides functions allowing to:
+      (+) Configure Noise Filters
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configure I2C Analog noise filter.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2Cx peripheral.
+  * @param  AnalogFilter New state of the Analog filter.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_BUSY;
+
+    /* Disable the selected I2C peripheral */
+    __HAL_I2C_DISABLE(hi2c);
+
+    /* Reset I2Cx ANOFF bit */
+    hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);
+
+    /* Set analog filter bit*/
+    hi2c->Instance->CR1 |= AnalogFilter;
+
+    __HAL_I2C_ENABLE(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Configure I2C Digital noise filter.
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2Cx peripheral.
+  * @param  DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
+{
+  uint32_t tmpreg;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_BUSY;
+
+    /* Disable the selected I2C peripheral */
+    __HAL_I2C_DISABLE(hi2c);
+
+    /* Get the old register value */
+    tmpreg = hi2c->Instance->CR1;
+
+    /* Reset I2Cx DNF bits [11:8] */
+    tmpreg &= ~(I2C_CR1_DNF);
+
+    /* Set I2Cx DNF coefficient */
+    tmpreg |= DigitalFilter << 8U;
+
+    /* Store the new register value */
+    hi2c->Instance->CR1 = tmpreg;
+
+    __HAL_I2C_ENABLE(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @}
+  */
+
+/** @defgroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions
+  * @brief    WakeUp Mode Functions
+  *
+@verbatim
+ ===============================================================================
+                      ##### WakeUp Mode Functions #####
+ ===============================================================================
+    [..] This section provides functions allowing to:
+      (+) Configure Wake Up Feature
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enable I2C wakeup from Stop mode(s).
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2Cx peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_BUSY;
+
+    /* Disable the selected I2C peripheral */
+    __HAL_I2C_DISABLE(hi2c);
+
+    /* Enable wakeup from stop mode */
+    hi2c->Instance->CR1 |= I2C_CR1_WUPEN;
+
+    __HAL_I2C_ENABLE(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Disable I2C wakeup from Stop mode(s).
+  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2Cx peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
+
+  if (hi2c->State == HAL_I2C_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_BUSY;
+
+    /* Disable the selected I2C peripheral */
+    __HAL_I2C_DISABLE(hi2c);
+
+    /* Enable wakeup from stop mode */
+    hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN);
+
+    __HAL_I2C_ENABLE(hi2c);
+
+    hi2c->State = HAL_I2C_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @}
+  */
+
+/** @defgroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions
+  * @brief    Fast Mode Plus Functions
+  *
+@verbatim
+ ===============================================================================
+                      ##### Fast Mode Plus Functions #####
+ ===============================================================================
+    [..] This section provides functions allowing to:
+      (+) Configure Fast Mode Plus
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Enable the I2C fast mode plus driving capability.
+  * @param ConfigFastModePlus Selects the pin.
+  *   This parameter can be one of the @ref I2CEx_FastModePlus values
+  * @note  For I2C1, fast mode plus driving capability can be enabled on all selected
+  *        I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+  *        on each one of the following pins PB6, PB7, PB8 and PB9.
+  * @note  For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+  *        can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+  * @note  For all I2C2 pins fast mode plus driving capability can be enabled
+  *        only by using I2C_FASTMODEPLUS_I2C2 parameter.
+  * @note  For all I2C3 pins fast mode plus driving capability can be enabled
+  *        only by using I2C_FASTMODEPLUS_I2C3 parameter.
+  * @note  For all I2C4 pins fast mode plus driving capability can be enabled
+  *        only by using I2C_FASTMODEPLUS_I2C4 parameter.
+  * @retval None
+  */
+void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+  /* Check the parameter */
+  assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
+
+  /* Enable SYSCFG clock */
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+  /* Enable fast mode plus driving capability for selected pin */
+  SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+  * @brief Disable the I2C fast mode plus driving capability.
+  * @param ConfigFastModePlus Selects the pin.
+  *   This parameter can be one of the @ref I2CEx_FastModePlus values
+  * @note  For I2C1, fast mode plus driving capability can be disabled on all selected
+  *        I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+  *        on each one of the following pins PB6, PB7, PB8 and PB9.
+  * @note  For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+  *        can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+  * @note  For all I2C2 pins fast mode plus driving capability can be disabled
+  *        only by using I2C_FASTMODEPLUS_I2C2 parameter.
+  * @note  For all I2C3 pins fast mode plus driving capability can be disabled
+  *        only by using I2C_FASTMODEPLUS_I2C3 parameter.
+  * @note  For all I2C4 pins fast mode plus driving capability can be disabled
+  *        only by using I2C_FASTMODEPLUS_I2C4 parameter.
+  * @retval None
+  */
+void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+  /* Check the parameter */
+  assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
+
+  /* Enable SYSCFG clock */
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+  /* Disable fast mode plus driving capability for selected pin */
+  CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
+}
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c

@@ -0,0 +1,658 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_hal_pwr.c
+  * @author  MCD Application Team
+  * @brief   PWR HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Power Controller (PWR) peripheral:
+  *           + Initialization/de-initialization functions
+  *           + Peripheral Control functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PWR PWR
+  * @brief PWR HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup PWR_Private_Defines PWR Private Defines
+  * @{
+  */
+
+/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
+  * @{
+  */
+#define PVD_MODE_IT               ((uint32_t)0x00010000)  /*!< Mask for interruption yielded by PVD threshold crossing */
+#define PVD_MODE_EVT              ((uint32_t)0x00020000)  /*!< Mask for event yielded by PVD threshold crossing        */
+#define PVD_RISING_EDGE           ((uint32_t)0x00000001)  /*!< Mask for rising edge set as PVD trigger                 */
+#define PVD_FALLING_EDGE          ((uint32_t)0x00000002)  /*!< Mask for falling edge set as PVD trigger                */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and de-initialization functions
+  *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Deinitialize the HAL PWR peripheral registers to their default reset values.
+  * @retval None
+  */
+void HAL_PWR_DeInit(void)
+{
+  __HAL_RCC_PWR_FORCE_RESET();
+  __HAL_RCC_PWR_RELEASE_RESET();
+}
+
+/**
+  * @brief Enable access to the backup domain
+  *        (RTC registers, RTC backup data registers).
+  * @note  After reset, the backup domain is protected against
+  *        possible unwanted write accesses.
+  * @note  RTCSEL that sets the RTC clock source selection is in the RTC back-up domain.
+  *        In order to set or modify the RTC clock, the backup domain access must be
+  *        disabled.
+  * @note  LSEON bit that switches on and off the LSE crystal belongs as well to the
+  *        back-up domain.
+  * @retval None
+  */
+void HAL_PWR_EnableBkUpAccess(void)
+{
+  SET_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+/**
+  * @brief Disable access to the backup domain
+  *        (RTC registers, RTC backup data registers).
+  * @retval None
+  */
+void HAL_PWR_DisableBkUpAccess(void)
+{
+  CLEAR_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+
+
+
+/**
+  * @}
+  */
+
+
+
+/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
+  *  @brief Low Power modes configuration functions
+  *
+@verbatim
+
+ ===============================================================================
+                 ##### Peripheral Control functions #####
+ ===============================================================================
+
+     [..]
+     *** PVD configuration ***
+    =========================
+    [..]
+      (+) The PVD is used to monitor the VDD power supply by comparing it to a
+          threshold selected by the PVD Level (PLS[2:0] bits in PWR_CR2 register).
+
+      (+) PVDO flag is available to indicate if VDD/VDDA is higher or lower
+          than the PVD threshold. This event is internally connected to the EXTI
+          line16 and can generate an interrupt if enabled. This is done through
+          __HAL_PVD_EXTI_ENABLE_IT() macro.
+      (+) The PVD is stopped in Standby mode.
+
+
+    *** WakeUp pin configuration ***
+    ================================
+    [..]
+      (+) WakeUp pins are used to wakeup the system from Standby mode or Shutdown mode.
+          The polarity of these pins can be set to configure event detection on high
+          level (rising edge) or low level (falling edge).
+
+
+
+    *** Low Power modes configuration ***
+    =====================================
+    [..]
+      The devices feature 8 low-power modes:
+      (+) Low-power Run mode: core and peripherals are running, main regulator off, low power regulator on.
+      (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running, main and low power regulators on.
+      (+) Low-power Sleep mode: Cortex-M4 core stopped, peripherals kept running, main regulator off, low power regulator on.
+      (+) Stop 0 mode: all clocks are stopped except LSI and LSE, main and low power regulators on.
+      (+) Stop 1 mode: all clocks are stopped except LSI and LSE, main regulator off, low power regulator on.
+      (+) Stop 2 mode: all clocks are stopped except LSI and LSE, main regulator off, low power regulator on, reduced set of waking up IPs compared to Stop 1 mode.
+      (+) Standby mode with SRAM2: all clocks are stopped except LSI and LSE, SRAM2 content preserved, main regulator off, low power regulator on.
+      (+) Standby mode without SRAM2: all clocks are stopped except LSI and LSE, main and low power regulators off.
+      (+) Shutdown mode: all clocks are stopped except LSE, main and low power regulators off.
+
+
+   *** Low-power run mode ***
+   ==========================
+    [..]
+      (+) Entry: (from main run mode)
+        (++) set LPR bit with HAL_PWREx_EnableLowPowerRunMode() API after having decreased the system clock below 2 MHz.
+
+      (+) Exit:
+        (++) clear LPR bit then wait for REGLP bit to be reset with HAL_PWREx_DisableLowPowerRunMode() API. Only
+             then can the system clock frequency be increased above 2 MHz.
+
+
+   *** Sleep mode / Low-power sleep mode ***
+   =========================================
+    [..]
+      (+) Entry:
+          The Sleep mode / Low-power Sleep mode is entered through HAL_PWR_EnterSLEEPMode() API
+          in specifying whether or not the regulator is forced to low-power mode and if exit is interrupt or event-triggered.
+          (++) PWR_MAINREGULATOR_ON: Sleep mode (regulator in main mode).
+          (++) PWR_LOWPOWERREGULATOR_ON: Low-power sleep (regulator in low power mode).
+          In the latter case, the system clock frequency must have been decreased below 2 MHz beforehand.
+          (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+          (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+
+      (+) WFI Exit:
+        (++) Any peripheral interrupt acknowledged by the nested vectored interrupt
+             controller (NVIC) or any wake-up event.
+
+      (+) WFE Exit:
+        (++) Any wake-up event such as an EXTI line configured in event mode.
+
+         [..] When exiting the Low-power sleep mode by issuing an interrupt or a wakeup event,
+             the MCU is in Low-power Run mode.
+
+   *** Stop 0, Stop 1 and Stop 2 modes ***
+   ===============================
+    [..]
+      (+) Entry:
+          The Stop 0, Stop 1 or Stop 2 modes are entered through the following API's:
+          (++) HAL_PWREx_EnterSTOP0Mode() for mode 0 or HAL_PWREx_EnterSTOP1Mode() for mode 1 or for porting reasons HAL_PWR_EnterSTOPMode().
+          (++) HAL_PWREx_EnterSTOP2Mode() for mode 2.
+      (+) Regulator setting (applicable to HAL_PWR_EnterSTOPMode() only):
+          (++) PWR_MAINREGULATOR_ON
+          (++) PWR_LOWPOWERREGULATOR_ON
+      (+) Exit (interrupt or event-triggered, specified when entering STOP mode):
+          (++) PWR_STOPENTRY_WFI: enter Stop mode with WFI instruction
+          (++) PWR_STOPENTRY_WFE: enter Stop mode with WFE instruction
+
+      (+) WFI Exit:
+          (++) Any EXTI Line (Internal or External) configured in Interrupt mode.
+          (++) Some specific communication peripherals (USART, LPUART, I2C) interrupts
+               when programmed in wakeup mode.
+      (+) WFE Exit:
+          (++) Any EXTI Line (Internal or External) configured in Event mode.
+
+       [..]
+          When exiting Stop 0 and Stop 1 modes, the MCU is either in Run mode or in Low-power Run mode
+          depending on the LPR bit setting.
+          When exiting Stop 2 mode, the MCU is in Run mode.
+
+   *** Standby mode ***
+   ====================
+     [..]
+      The Standby mode offers two options:
+      (+) option a) all clocks off except LSI and LSE, RRS bit set (keeps voltage regulator in low power mode).
+        SRAM and registers contents are lost except for the SRAM2 content, the RTC registers, RTC backup registers
+        and Standby circuitry.
+      (+) option b) all clocks off except LSI and LSE, RRS bit cleared (voltage regulator then disabled).
+        SRAM and register contents are lost except for the RTC registers, RTC backup registers
+        and Standby circuitry.
+
+      (++) Entry:
+          (+++) The Standby mode is entered through HAL_PWR_EnterSTANDBYMode() API.
+                SRAM1 and register contents are lost except for registers in the Backup domain and
+                Standby circuitry. SRAM2 content can be preserved if the bit RRS is set in PWR_CR3 register.
+                To enable this feature, the user can resort to HAL_PWREx_EnableSRAM2ContentRetention() API
+                to set RRS bit.
+
+      (++) Exit:
+          (+++) WKUP pin rising edge, RTC alarm or wakeup, tamper event, time-stamp event,
+                external reset in NRST pin, IWDG reset.
+
+      [..]    After waking up from Standby mode, program execution restarts in the same way as after a Reset.
+
+
+    *** Shutdown mode ***
+   ======================
+     [..]
+      In Shutdown mode,
+        voltage regulator is disabled, all clocks are off except LSE, RRS bit is cleared.
+        SRAM and registers contents are lost except for backup domain registers.
+
+      (+) Entry:
+          The Shutdown mode is entered through HAL_PWREx_EnterSHUTDOWNMode() API.
+
+      (+) Exit:
+          (++) WKUP pin rising edge, RTC alarm or wakeup, tamper event, time-stamp event,
+               external reset in NRST pin.
+
+         [..] After waking up from Shutdown mode, program execution restarts in the same way as after a Reset.
+
+
+   *** Auto-wakeup (AWU) from low-power mode ***
+   =============================================
+    [..]
+      The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
+      Wakeup event, a tamper event or a time-stamp event, without depending on
+      an external interrupt (Auto-wakeup mode).
+
+      (+) RTC auto-wakeup (AWU) from the Stop, Standby and Shutdown modes
+
+
+        (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
+             configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
+
+        (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
+             is necessary to configure the RTC to detect the tamper or time stamp event using the
+             HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions.
+
+        (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to
+              configure the RTC to generate the RTC WakeUp event using the HAL_RTCEx_SetWakeUpTimer_IT() function.
+
+@endverbatim
+  * @{
+  */
+
+
+
+/**
+  * @brief Configure the voltage threshold detected by the Power Voltage Detector (PVD).
+  * @param sConfigPVD: pointer to a PWR_PVDTypeDef structure that contains the PVD
+  *        configuration information.
+  * @note Refer to the electrical characteristics of your device datasheet for
+  *         more details about the voltage thresholds corresponding to each
+  *         detection level.
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
+  assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
+
+  /* Set PLS bits according to PVDLevel value */
+  MODIFY_REG(PWR->CR2, PWR_CR2_PLS, sConfigPVD->PVDLevel);
+
+  /* Clear any previous config. Keep it clear if no event or IT mode is selected */
+  __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
+  __HAL_PWR_PVD_EXTI_DISABLE_IT();
+  __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
+
+  /* Configure interrupt mode */
+  if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_IT();
+  }
+
+  /* Configure event mode */
+  if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
+  }
+
+  /* Configure the edge */
+  if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
+  }
+
+  if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+  }
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief Enable the Power Voltage Detector (PVD).
+  * @retval None
+  */
+void HAL_PWR_EnablePVD(void)
+{
+  SET_BIT(PWR->CR2, PWR_CR2_PVDE);
+}
+
+/**
+  * @brief Disable the Power Voltage Detector (PVD).
+  * @retval None
+  */
+void HAL_PWR_DisablePVD(void)
+{
+  CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE);
+}
+
+
+
+
+/**
+  * @brief Enable the WakeUp PINx functionality.
+  * @param WakeUpPinPolarity: Specifies which Wake-Up pin to enable.
+  *         This parameter can be one of the following legacy values which set the default polarity
+  *         i.e. detection on high level (rising edge):
+  *           @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5
+  *
+  *         or one of the following value where the user can explicitly specify the enabled pin and
+  *         the chosen polarity:
+  *           @arg @ref PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW
+  *           @arg @ref PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW
+  *           @arg @ref PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW
+  *           @arg @ref PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW
+  *           @arg @ref PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW
+  * @note  PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent.
+  * @retval None
+  */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity)
+{
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity));
+
+  /* Specifies the Wake-Up pin polarity for the event detection
+    (rising or falling edge) */
+  MODIFY_REG(PWR->CR4, (PWR_CR3_EWUP & WakeUpPinPolarity), (WakeUpPinPolarity >> PWR_WUP_POLARITY_SHIFT));
+
+  /* Enable wake-up pin */
+  SET_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinPolarity));
+
+
+}
+
+/**
+  * @brief Disable the WakeUp PINx functionality.
+  * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
+  *         This parameter can be one of the following values:
+  *           @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5
+  * @retval None
+  */
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
+{
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+
+  CLEAR_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinx));
+}
+
+
+/**
+  * @brief Enter Sleep or Low-power Sleep mode.
+  * @note  In Sleep/Low-power Sleep mode, all I/O pins keep the same state as in Run mode.
+  * @param Regulator: Specifies the regulator state in Sleep/Low-power Sleep mode.
+  *          This parameter can be one of the following values:
+  *            @arg @ref PWR_MAINREGULATOR_ON Sleep mode (regulator in main mode)
+  *            @arg @ref PWR_LOWPOWERREGULATOR_ON Low-power Sleep mode (regulator in low-power mode)
+  * @note  Low-power Sleep mode is entered from Low-power Run mode. Therefore, if not yet
+  *        in Low-power Run mode before calling HAL_PWR_EnterSLEEPMode() with Regulator set
+  *        to PWR_LOWPOWERREGULATOR_ON, the user can optionally configure the
+  *        Flash in power-down monde in setting the SLEEP_PD bit in FLASH_ACR register.
+  *        Additionally, the clock frequency must be reduced below 2 MHz.
+  *        Setting SLEEP_PD in FLASH_ACR then appropriately reducing the clock frequency must
+  *        be done before calling HAL_PWR_EnterSLEEPMode() API.
+  * @note  When exiting Low-power Sleep mode, the MCU is in Low-power Run mode. To move in
+  *        Run mode, the user must resort to HAL_PWREx_DisableLowPowerRunMode() API.
+  * @param SLEEPEntry: Specifies if Sleep mode is entered with WFI or WFE instruction.
+  *           This parameter can be one of the following values:
+  *            @arg @ref PWR_SLEEPENTRY_WFI enter Sleep or Low-power Sleep mode with WFI instruction
+  *            @arg @ref PWR_SLEEPENTRY_WFE enter Sleep or Low-power Sleep mode with WFE instruction
+  * @note  When WFI entry is used, tick interrupt have to be disabled if not desired as
+  *        the interrupt wake up source.
+  * @retval None
+  */
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR(Regulator));
+  assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
+
+  /* Set Regulator parameter */
+  if (Regulator == PWR_MAINREGULATOR_ON)
+  {
+    /* If in low-power run mode at this point, exit it */
+    if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF))
+    {
+      if (HAL_PWREx_DisableLowPowerRunMode() != HAL_OK)
+      {
+        return ;
+      }
+    }
+    /* Regulator now in main mode. */
+  }
+  else
+  {
+    /* If in run mode, first move to low-power run mode.
+       The system clock frequency must be below 2 MHz at this point. */
+    if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF) == RESET)
+    {
+      HAL_PWREx_EnableLowPowerRunMode();
+    }
+  }
+
+  /* Clear SLEEPDEEP bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+  /* Select SLEEP mode entry -------------------------------------------------*/
+  if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
+  {
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __SEV();
+    __WFE();
+    __WFE();
+  }
+
+}
+
+
+/**
+  * @brief Enter Stop mode
+  * @note  This API is named HAL_PWR_EnterSTOPMode to ensure compatibility with legacy code running
+  *        on devices where only "Stop mode" is mentioned with main or low power regulator ON.
+  * @note  In Stop mode, all I/O pins keep the same state as in Run mode.
+  * @note  All clocks in the VCORE domain are stopped; the PLL, the MSI,
+  *        the HSI and the HSE oscillators are disabled. Some peripherals with the wakeup capability
+  *        (I2Cx, USARTx and LPUART) can switch on the HSI to receive a frame, and switch off the HSI
+  *        after receiving the frame if it is not a wakeup frame. In this case, the HSI clock is propagated
+  *        only to the peripheral requesting it.
+  *        SRAM1, SRAM2 and register contents are preserved.
+  *        The BOR is available.
+  *        The voltage regulator can be configured either in normal (Stop 0) or low-power mode (Stop 1).
+  * @note  When exiting Stop 0 or Stop 1 mode by issuing an interrupt or a wakeup event,
+  *         the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register
+  *         is set; the MSI oscillator is selected if STOPWUCK is cleared.
+  * @note  When the voltage regulator operates in low power mode (Stop 1), an additional
+  *         startup delay is incurred when waking up.
+  *         By keeping the internal regulator ON during Stop mode (Stop 0), the consumption
+  *         is higher although the startup time is reduced.
+  * @param Regulator: Specifies the regulator state in Stop mode.
+  *          This parameter can be one of the following values:
+  *            @arg @ref PWR_MAINREGULATOR_ON  Stop 0 mode (main regulator ON)
+  *            @arg @ref PWR_LOWPOWERREGULATOR_ON  Stop 1 mode (low power regulator ON)
+  * @param STOPEntry: Specifies Stop 0 or Stop 1 mode is entered with WFI or WFE instruction.
+  *          This parameter can be one of the following values:
+  *            @arg @ref PWR_STOPENTRY_WFI  Enter Stop 0 or Stop 1 mode with WFI instruction.
+  *            @arg @ref PWR_STOPENTRY_WFE  Enter Stop 0 or Stop 1 mode with WFE instruction.
+  * @retval None
+  */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR(Regulator));
+
+  if(Regulator == PWR_LOWPOWERREGULATOR_ON)
+  {
+    HAL_PWREx_EnterSTOP1Mode(STOPEntry);
+  }
+  else
+  {
+    HAL_PWREx_EnterSTOP0Mode(STOPEntry);
+  }
+}
+
+/**
+  * @brief Enter Standby mode.
+  * @note  In Standby mode, the PLL, the HSI, the MSI and the HSE oscillators are switched
+  *        off. The voltage regulator is disabled, except when SRAM2 content is preserved
+  *        in which case the regulator is in low-power mode.
+  *        SRAM1 and register contents are lost except for registers in the Backup domain and
+  *        Standby circuitry. SRAM2 content can be preserved if the bit RRS is set in PWR_CR3 register.
+  *        To enable this feature, the user can resort to HAL_PWREx_EnableSRAM2ContentRetention() API
+  *        to set RRS bit.
+  *        The BOR is available.
+  * @note  The I/Os can be configured either with a pull-up or pull-down or can be kept in analog state.
+  *        HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() respectively enable Pull Up and
+  *        Pull Down state, HAL_PWREx_DisableGPIOPullUp() and HAL_PWREx_DisableGPIOPullDown() disable the
+  *        same.
+  *        These states are effective in Standby mode only if APC bit is set through
+  *        HAL_PWREx_EnablePullUpPullDownConfig() API.
+  * @retval None
+  */
+void HAL_PWR_EnterSTANDBYMode(void)
+{
+  /* Set Stand-by mode */
+  MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_STANDBY);
+
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+/* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM)
+  __force_stores();
+#endif
+  /* Request Wait For Interrupt */
+  __WFI();
+}
+
+
+
+/**
+  * @brief Indicate Sleep-On-Exit when returning from Handler mode to Thread mode.
+  * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+  *       re-enters SLEEP mode when an interruption handling is over.
+  *       Setting this bit is useful when the processor is expected to run only on
+  *       interruptions handling.
+  * @retval None
+  */
+void HAL_PWR_EnableSleepOnExit(void)
+{
+  /* Set SLEEPONEXIT bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+
+/**
+  * @brief Disable Sleep-On-Exit feature when returning from Handler mode to Thread mode.
+  * @note Clear SLEEPONEXIT bit of SCR register. When this bit is set, the processor
+  *       re-enters SLEEP mode when an interruption handling is over.
+  * @retval None
+  */
+void HAL_PWR_DisableSleepOnExit(void)
+{
+  /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+
+
+/**
+  * @brief Enable CORTEX M4 SEVONPEND bit.
+  * @note Set SEVONPEND bit of SCR register. When this bit is set, this causes
+  *       WFE to wake up when an interrupt moves from inactive to pended.
+  * @retval None
+  */
+void HAL_PWR_EnableSEVOnPend(void)
+{
+  /* Set SEVONPEND bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+
+/**
+  * @brief Disable CORTEX M4 SEVONPEND bit.
+  * @note Clear SEVONPEND bit of SCR register. When this bit is set, this causes
+  *       WFE to wake up when an interrupt moves from inactive to pended.
+  * @retval None
+  */
+void HAL_PWR_DisableSEVOnPend(void)
+{
+  /* Clear SEVONPEND bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+
+
+
+
+/**
+  * @brief PWR PVD interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWR_PVDCallback(void)
+{
+  /* NOTE : This function should not be modified; when the callback is needed,
+            the HAL_PWR_PVDCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */